Gadget Labs WAVE/4 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gadget Labs WAVE/4. Gadget Labs WAVE/4 20 pagina's. 4 channel pc digital audio card

Pagina afdrukken
Follow these simple steps to install the GoldWave:
Insert the disk labeled, 'Wave/4 software drivers & GoldWave
n
disk' into floppy drive A.
From the Windows 'Start' menu, select 'Run' and type:
n
'a:setup.exe' and press 'enter'.
Follow the prompts and GoldWave will be installed.
n
Setting up GoldWave to use the Wave/4 card is straightforward. Follow
the steps below.
Select the menu item, 'Tools | Device controls' and the Device
n
controls panel will be displayed.
Click on the setup button:
n
In the 'Recording Options' section, check 'Monitor input'.
n
In the 'Buffer options' section, check 'Triple buffering'
n
Set 'Record (s)' to 0.5 seconds.
n
Set 'Playback (s)' to 0.5 seconds.
n
Click on the 'Input' button to select the desired Wave/4 IN
n
device.
Click on the Output button to Select the desired Wave/4 OUT
n
device.
To learn to how to use GoldWave, lots of good information is
contained in the Help file.
Please note the following GoldWave quirk J J : If you switch audio
INPUT devices in GoldWave, you must first play some audio before you
can begin recording.
A few basic tips about multi-track recording
with your PC
Multi-channel, multi-track recording consumes a great deal of re-
sources on your PC. Depending on how serious you are about the
results and how many tracks you need, you should have the fastest
processor and the biggest and fastest hard drive that you can afford.
Of course, most of us working folks can't afford to rush out and buy the
fastest PC and besides, at today's pace of technology change, it would
start to become obsolete before we got it home. So in the interest of
making the best use of what we have, here's a couple of very basic tips
(most of which are obvious, but sometimes forgotten).
12