Gadget Labs WAVE/4 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gadget Labs WAVE/4. Gadget Labs WAVE/4 20 pagina's. 4 channel pc digital audio card

Pagina afdrukken

Getting started

Here's a list of stuff that's included with this package:

Wave/4 card

Y-adapter cables for RCA connections (4 adapters included)

9-pin to MIDI adapter cable for In / Out / Thru

Wave/4 software drivers & GoldWave disk

Quick Installation Guide and this User's Guide (duh)

Before you begin installing the Wave/4 card please note:

Static electricity can damage electronic components!

Take the following precaution before you install the Wave/4 card:

Shut down and turn off the PC but leave it plugged in. Touch the

metal chassis of the PC to drain the static from your bod J before

you touch the Wave/4 card.

Installing the Wave/4 card and software drivers

The Wave/4 card and drivers are designed to be truly Plug and Play.

Unlike other cards you may have installed in the past, there are no

switches on the Wave/4 card to configure (or hassle with). Installation

in most systems should take only a few minutes. If you have any

difficulties with the installation or operation of the Wave/4 card,

check the Troubleshooting section later in this user guide.

The Quick installation Guide is included to give you graphical, step-by-

step instructions on installing the Wave/4 card. Here's a recap of the

process:

Shut down your PC and Unplug it.

Open the case cover and locate a free ISA slot. Please be aware

that some some circuit cards in the PC can cause interference

and noise in your audio. To minimize audio interference with

the Wave/4 card, select a slot that is away from your graphics

card or other sound cards.

Close up the case and turn on the PC

As Windows® starts up, it will find the Wave/4 card and

automatically install it.

The following prompts will be displayed by the system:

'New Hardware Found'

'Gadget Labs Wave/4'

'Select which driver you want to install for your new hardware'