Gadget Labs WavePRO ADAT Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gadget Labs WavePRO ADAT. Gadget Labs WavePRO ADAT 15 pagina's. Option cards

Pagina afdrukken
The Control Panel applet for the WavePRO interface has a Clock
Source setting. Set the Clock Source to External to receive digital
audio data correctly.
TIP for using Word Clock
If you are experiencing difficulty using the Word Clock feature, you
may need to adjust the electrical signal termination value on the
WavePRO Word Clock input jack.
Check the manual for the other digital audio gear to determine the
optimal signal termination value for the WavePRO interface.
Use a jumper block on J4 to change the Word Clock signal termination
value.
No Word Clock
termination
JP4
2
1
No jumper block
75 Ω Word Clock
termination
(default setting)
4
2
3
1
jumper block
Pins 3 & 4
JP4
4
3
12
110 Ω Word Clock
termination
JP4
2
4
1
3
jumper block
Pins 1 & 2