Dymo LabelWriter 400 Duo Guide Instellen - Pagina 7

Blader online of download pdf Instellen voor {categorie_naam} Dymo LabelWriter 400 Duo Guide. Dymo LabelWriter 400 Duo Guide 8 pagina's. Desktop/pc connected labelmaker
Ook voor Dymo LabelWriter 400 Duo Guide: Gebruiksaanwijzing (13 pagina's), Brochure (2 pagina's), Snelle referentiehandleiding (8 pagina's), Installatiehandleiding (11 pagina's), Brochure & specificaties (2 pagina's), Inhoud en installatie (4 pagina's)

Setting Up the DYMO LabelWriter 400 Printer with Terminal Services

Click Save in the Connection settings box.

Note

The information that you set up becomes the default setting for all

Remote Desktop connections on this computer and is saved in a

file called Default.rdp.

Click Connect to open a terminal server session.

Open the DYMO LabelWriter 400 printer properties within the terminal server

session.

Note

If the DYMO LabelWriter 400 printer is not available within the

terminal server, follow the instructions listed under

DYMO Label Software on the terminal server on page

Select the Ports tab.

Select the TS### port that corresponds with the workstation that is attached

to the printer.

Click Apply to save your settings.

To test the DYMO printer through a terminal server session

From the computer attached to the DYMO LabelWriter 400 printer, open a

terminal server session.

Open OfficeMate or OfficeMate Enterprise Home Office.

Click Setup and select Preferences.

Select the Label Printer tab.

To install the