Dymo LabelWriter 450 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dymo LabelWriter 450. Dymo LabelWriter 450 16 pagina's. How to order and insert a roll of labels in the dymo labelwriter
Ook voor Dymo LabelWriter 450: Snelstarthandleiding (20 pagina's), Snelstarthandleiding (14 pagina's), Overzicht (2 pagina's), Installatiehandleiding (11 pagina's), Snelstarthandleiding (10 pagina's), Gebruikershandleiding (19 pagina's), Handleiding (3 pagina's)

Windows Control Panel (Image 5). Proceed to the KeepnTrack Conﬁguration

section.

NOTE: IT IS ESSENTIAL THAT THE NAME OF THE PRINTER REMAIN AS IT WAS WHEN

INSTALLED. DO NOT CHANGE IT. SUPPORTED NAMES ARE:

DYMO LabelWriter 400, DYMO LabelWriter 450, DYMO LabelWriter Twin Turbo

Installing the Printer Software on Macintosh

Before using the label printer, you must ﬁrst install the printer software. The

software can be found on the installation CD provided. Locate and Open the ﬁle

labeled DLS8Setup.8.x.x.dmg. Double-Click on the DYMO Label v.8.pkg ﬁle within to

begin the installation (Image 6).

NOTE: THE SOFTWARE COMPONENTS MAY ALSO BE DOWNLOADED FROM:

http://www.keepntrack.com/support_downloads.html

IG0080.8 - v6010 Badge Printer!

Image 5