Adel Trinity 788 Bedieningshandleiding - Pagina 7
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Adel Trinity 788. Adel Trinity 788 12 pagina's. Biometric fingerprint door lock
Ook voor Adel Trinity 788: Bedieningshandleiding (12 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 2. Assignment of Fingerprint and Password
- 3. Initialization of the Door Lock
- 4. Enrollment of Master Fingerprints / Member Fingerprints
- 5. Setup of Spare Password
- 6. Deletion of Fingerprints
- 7. Deletion of Password
- 8. Daily Use State
- 9. Use of Emergency Key
- 10. Use of External Power
- 11. Change of Batteries
Trinity 788 Operation Manual
Notes:
1. If the buzzer makes two short beeps, and the red indicator light flashes, the member fingerprint
setup fails;
2. After successful enrollment of a member fingerprint, continue operation while the LED displays
0-
to enroll other fingerprints needed; or else the LED will stop display two seconds later;
3. The enrollment of the member fingerprints can only be completed under the authorization of
the master fingerprint;
4. The fingerprint codes are correspondent with the members. The above explanation takes the
user with fingerprint code
03
as an example;
5. When inputting fingerprint code, you can press Button
re-input, or press Button
during operation to exit setup state;
*
11
to cancel current operation and
*
Trinity 788 Operation Manual
IV. Setup of spare password (code 99)
Operational procedure
Put the master fingerprint on the fingerprint
window and enter door open state
Press Button
+
to enter the enrollment mode
Press Button
+
or
-
to choose the first
digit
9
of the password code, and press
Button #
to confirm the choice
Continue to press Button
+
or
-
to adjust
the second digit
9
of the password code, and
press Button
#
to confirm
Press Button #
again to confirm
the password code
99
The password composes of 6 digits. Press Button
+
or
-
to choose the first digit of the password,
and press Button #
to confirm the choice
Set other 5 digits following the above step
, press
Button
#
to enter each digit of the password.
The spare password is set
Indication of the lock
Green light is on,
and the LED displays the code of the master fingerprint
A beep sound heard, and the LED displays
0-
The LED displays the figure
9
just set which jumps
to the tens place, and the ones place displays
0
The LED displays the fingerprint code
99
and flashes alternately
The LED displays
- 0
after a beep,
both green and red indicator light on.
The LED displays the figure selected after a beep,
the figure jumps to the tens place,
and the ones place displays
0
Green light on and red light off after two long beeps,
and the LED displays the last two digits
of the password is set
The LED displays
0- , the display will stop 5
seconds later, with green lights turn off.
12