Active Products ZE03 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Active Products ZE03. Active Products ZE03 16 pagina's. 1650psi everyday pressure washer
Pagina afdrukkenIMPORTANT SAFETY INSTRUCTIONS - READ FIRST!
Safety Warnings
When using this product, basic precautions
should always be followed:
Read all the instructions before using the
•
product.
Water spray must never be directed
•
towards any electric wiring, devices or
directly towards the pressure washer
machine itself or fatal electric shock may
occur.
To reduce the risk of injury, do not operate
•
the machine near children.
Learn how to stop the machine and release
•
pressure quickly. Be thoroughly familiar
with the controls.
Stay alert—watch what you are doing.
•
For use with cold water supply only. Do not
•
draw other liquids.
The pressure washer should not be used in
•
areas where gas vapours may be present.
An electric spark could cause an explosion
or fire.
To minimize the amount of water getting
•
into the pressure washer, the unit should
be placed as far as possible from the
cleaning site during operation.
Avoid accidental starts. Shut power "OFF"
•
before connecting or disconnecting cord to
electrical outlets.
Do not operate the product when fatigued
•
or under the influence of alcohol or drugs.
Do not stand on unstable surfaces. Stand
•
with both feet balanced at all times.
Prior to starting the pressure washer in cold
•
weather, be sure ice has not formed in any
part of the equipment.
Never carry your pressure washer by the
•
cord. Do not pull on the cord to disconnect
from the outlet.
To allow free air circulation, the pressure
•
washer should not be covered during
operation.
• Keep operating area clear of all people.
• Follow the maintenance instructions
specified in the manual.
Warnings
• Do not use with flammable liquids and toxic
chemicals.
• Injection Hazard: Equipment can cause
serious injury if the spray penetrates the skin.
• Do not point the gun at anyone or any part of
the body. In case of penetration seek medical
aid immediately.
• This system is capable of producing 1650PSI.
To avoid rupture and injury, do not operate
this pump with components rated less than
1650PSI working pressure (including but not
limited to spray guns, hose and hose
connections).
• Before servicing, cleaning or removal of any
parts, shut "OFF" power and relieve pressure.
• Do not spray electrical apparatus and wiring.
If connection is made to a portable water
system, the system shall be protected against
backflow.
WARNING - Risk of Injection or Injury - Do Not
Direct Discharge Stream at Persons
High pressure jet can be dangerous if misused.
•
The jet must not be directed at persons, animals,
electrical devices, or the unit itself.
WARNING - Risk of Explosion - Do not spray
flammable liquids
• Do not use acids and solvents in this product.
These products can cause physical injuries to the
operator and irreversible damage to the machine.
CAUTION - Gun Kicks Back - Hold with both
hands
• The trigger gun safety lock prevents the trigger
from accidentally being engaged. The safety
feature DOES NOT lock trigger in the ON
position.
WARNING - Risk of Electrocution
• Inspect cord before using - Do not use if cord is
damaged.
• Keep all connections dry and off the ground.
• Do not touch plug with wet hands.
• Do not use extension cord with the product.
WARNING: Do not spray electrical apparatus
and wiring.
WARNING: When a combustible liquid is sprayed
there may be danger of fire or explosion
especially in a closed area. Read instruction
manual before operating.
WARNING: Arcing parts. Keep the
compressor/motor at least 6 meters away from
explosive vapours.
Save these instructions
Servicing of a double-insulation product:
In a double-insulation product, two systems
of insulation are provided instead of
grounding. No grounding means is provided
on a double-insulated product, nor should a
means for grounding be added to the
product. Servicing a double-insulated
product requires extreme care and
knowledge of the system, and should be
done only by qualified service personnel.
Replacement parts of a double-insulated
product must be identical to the parts they
replace. A double-insulated product is
marked with the words "DOUBLE INSULA-
TION" or "DOUBLE INSULATED". The
symbol "
" may also be marked on the
product.
1