GAE GA101 Series Gebruikershandleiding voor het product - Pagina 6

Blader online of download pdf Gebruikershandleiding voor het product voor {categorie_naam} GAE GA101 Series. GAE GA101 Series 10 pagina's. High power e-h tuner

Pagina afdrukken
Product User Manual
Model GA101x Series High Power E-H Tuner

INSTALLATION

Preliminary Inspection

Waveguide Configuration

Flange Connections

© 2002-2003 Gerling Applied Engineering, Inc.
Upon arrival at the installation site the tuner should be thoroughly
inspected for damage or wear caused during shipping. Any visible
damage to the packaging material or the tuner itself should be
noted and reported immediately to the shipping company in
accordance with standard claims procedures. The following
components are included:
a) High Power E-H Tuner
b) Product User Manual
The high power E-H tuner can be connected to and used with any
common waveguide component having a compatible flange (see
below). Mounting can be in any convenient position and orientation
with either flange positioned towards the process load. Ideally, the
tuner should be located as close to the process load as possible.
Figure 1 illustrates a typical waveguide configuration.
Figure 1 – Typical waveguide configuration for process load
impedance tuning.
Both flanges of the E-H tuner must be properly connected to
another waveguide component. Bolts and nuts must be installed at
all flange bolt holes on both flanges prior to operation. Model
GA1014 is available with flanges designed for used with the
Page 6
Modesto, CA