Gage CompuScope 1220 Hardware Handleiding - Pagina 10

Blader online of download pdf Hardware Handleiding voor {categorie_naam} Gage CompuScope 1220. Gage CompuScope 1220 17 pagina's.

Pagina afdrukken
Absolute Max. Amplitude:
1 MΩ impedance: ±15 Volts (continuous)
50 Ω impedance: ±5 Volts (continuous),
DC Accuracy
Sampling Rates
Protection
1 MΩ impedance: Diode Clamped
50 Ω impedance: No protection
DYNAMIC PARAMETERS
Measured using 5 MHz sine wave input at 20 MS/s with amplitude of 95% of full scale on the ± 1 V range.
Typical values listed below.
SNR:
SFDR:
ENOB:
ACQUISITION MEMORY
Data Storage:
Memory sizes:
Maximum memory depth: Up to half on-board memory per channel
TRIGGERING
Number of Trigger Inputs: 2 per card
Trigger Source:
Input combination:
Type:
Sensitivity:
Level Accuracy:
Slope:
Post Trigger Data:
10
±15 Volts (for 1ms duration)
Input Range
± 10 V
± 5 V
± 2 V
± 1 V
± 500 mV
± 200 mV
± 100 mV
± 50 mV
20 MS/s, 10 MS/s, 5 MS/s, 2 MS/s, 1 MS/s, 500 kS/s, 200 kS/s,
100 kS/s, 50 kS/s,20 kS/s, 10 kS/s, 5 kS/s, 2 kS/s, 1 kS/s
55 dB
57 dB
8.9 bits
In on-board memory
1 Msamples,
4 Msamples,
8 Msamples,
64 Msamples,
256 Msamples
512 Msamples,
1 Gsamples
CH A, CH B, EXT or Software
Wired-OR
Analog triggering
± 20% of full scale
± 10% of full scale
Positive or Negative, software selectable
64 points minimum in single record acquisition
128 points minimum in multiple record acquisition
Can be defined with a 64 point resolution
Accuracy
± 0.5%
± 0.5%
± 0.5%
± 0.5%
± 0.5%
± 0.5%
± 1%
± 2%
CompuScope 1220