Gage Bilt GB128 Series Originele handleiding - Pagina 6
Blader online of download pdf Originele handleiding voor {categorie_naam} Gage Bilt GB128 Series. Gage Bilt GB128 Series 16 pagina's. 20v battery installation tool
TERMS AND SYMBOLS
- Product complies with requirements
set forth by
directives.
- Hearing protection and eye protection
required while using this equipment.
- Read manual prior to using equipment
- Wear safety boots
WARNINGS
- Must be understood to avoid severe
CAUTIONS
-
show conditions that will damage equip-
ment and/or structure.
Notes -
are reminders of required procedures.
GENERAL SAFETY RULES:
For multiple hazards, read and understand the safety instructions before installing,
operating, repairing, maintaining, changing accessories on, or working near the
assembly power tool for non-threaded mechanical fasteners.
2. Only qualified and trained operators should install, adjust or use the assembly power
tool for non threaded mechanical fasteners.
3. Do not modify this assembly power tool for non-threaded mechanical fasteners.
Modifications can reduce effectiveness of safety measures and increase the risks to
the operator.
4. Do not discard safety instructions; give them to the operator.
5. Do not use assembly power tool for non-threaded mechanical fasteners if it has been
damaged.
6. Tools shall be inspected periodically to verify all ratings and markings required are
legible. The employer/user shall contact the manufacturer to obtain replacement
marking labels when necessary.
PROJECTILE HAZARDS:
1. Disconnect the tool from the energy source when changing inserted tools/nose
assemblies or accessories.
2. Be aware that failure of the workpiece or accessories, or even the inserted tool/nose
assembly itself can generate high-velocity projectiles.
3. Always wear impact resistant eye protection during operation of the tool. The grade of
protection required should be assessed for each use.
4. The risk to others should also be assessed at this time.
5. Ensure that the workpiece is securely fixed.
6. Check that the means of protection from ejection of fastener and/or stem is in place
and operative (such as the deflector or collection bottle).
7. If the mandrel collecting containers can be fitted, ensure they are properly connected
and used correctly. By-passing of the safety switch is prohibited.
8. Forcible ejection of the mandrel from the front of the nose assembly is possible.
ELECTRICAL HAZARDS:
The plug must not be altered in any way. Do not use adapter plugs in conjunction with
earthed fast chargers.
Avoid physical contact with ungrounded surfaces, such as pipes, heaters, cookers or
refrigerators.
Keep installation tools away from water or rain. The ingress of water into the installation
tool increases the risk of electrical shock.
3. Do not misuse the cable, e.g. for carrying or hanging the fast charger or for pulling the
plug out of the socket. Keep the cable away from heat, oil, sharp edges or
moving
parts. Damage or twisted cables increase risk of electric shock.
4. When using the installation tool outdoors, use for the fast charger only extension
cords that are also suitable for outdoor use. This will reduce risk of electric
shock.
5. If the use of the installation tool in a damp environment is unavoidable, use for the fast
charger a residual current circuit breaker to avoid risk of shock.
GB128 20V BATTERY INSTALLATION TOOL
SAFETY WARNINGS
the relevant European
personal injury.
OPERATING HAZARDS:
1. Use of tool can expose the operator's hands to hazards, including crushing, impacts,
cuts, abrasions and heat. Wear suitable gloves to protect hands.
2. Operators and maintenance personnel shall be physically able to handle the bulk,
weight and power of the tool.
3. Hold the tool correctly; be ready to counteract normal or sudden movements and
have both hands available.
4. Maintain a balanced body position and secure footing.
5. Release the start-and-stop device in the case of interruption of energy supply.
6. Use only lubricants recommended by the manufacturer.
7. Avoid unsuitable postures as it is likely for these positions not to allow counteracting
of normal or unexpected movement of the tool.
8. If the tool is fixed to a suspension device, make sure that fixation is secure.
9. Beware of the risk of crushing or pinching if nose equipment is not fitted.
10. Due to the tool weight, it is recommended safety shoes be worn during operation.
11. It is recommended tool be operated not more than 50 out of every 60 minutes, where
prolonged use is expected.
REPETITIVE MOTIONS HAZARDS:
1. When using the tool, the operator can experience discomfort in the hands, arms,
shoulders, neck or other parts of the body.
2. While using the tool, the operator should adopt a comfortable posture while maintaining
a secure footing and avoiding awkward or off balanced postures. The operator should
change posture during extended tasks; this can help avoid discomfort and fatigue.
3. If the operator experiences symptoms such as persistent or recurring discomfort, pain,
throbbing, aching, tingling, numbness, burning sensations or stiffness, these
warning
signs should not be ignored. The operator should tell the employer and
consult a
qualified health professional.
ACCESSORY HAZARDS:
1. Disconnect tool from energy supply before changing the nose assembly or accessory.
2. Use only sizes and types of accessories recommended by the manufacturer. Do not
use other types or sizes of accessories.
WORKPLACE HAZARDS:
Do not work with the installation tool in a potentially explosive atmosphere where there
may be flammable liquids, gases or dusts. Installation tools generate sparks that could
ignite dusts or vapors.
Keep children and other persons away when working with the installation tool. If
distracted, you may lose control of the installation tool.
Do not use the installation tool when you are tired or under the influence of drugs, alcohol
or medication. Severe personal injury could result.
Be careful, pay attention to what you are doing and work sensibly when using the
installation tool.
NOISE HAZARDS:
Exposure to high noise levels can cause permanent, disabling hearing loss and other
problems, such as tinnitus (ringing, buzzing, whistling or humming in the ears).
Therefore, risk assessment and the implementation of appropriate controls for these
hazards are essential.
2. Appropriate controls to reduce the risk may include actions such as damping materials
to prevent workpieces from "ringing".
3. Use hearing protection in accordance with employer's instructions and as required by
occupational health and safety regulations.
4. Operate and maintain the assembly power tool for non-threaded mechanical fasteners
as recommended in the instruction handbook, to prevent an unnecessary
increase in the noise level.
5. Select, maintain and replace the consumable/inserted tool as recommended in the
instruction handbook, to prevent an unnecessary increase in noise.
6. If the power tool has a silencer, always ensure that it is in place and in good working
order when the power tool is being operated.
VIBRATION HAZARDS:
1. Exposure to vibration can cause disabling damage to the nerves and blood supply of
the hands and arms.
2. Wear warm clothing when working in cold conditions and keep your hands warm and
dry.
3. If you experience numbness, tingling, pain or whitening of the skin in your fingers or
hands, stop using the assembly power tool for non-threaded mechanical
fasteners, tell your employer and consult a physician.
4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip
can then be used to support the tool.
#
6/21