Gage Bilt GB55B Originele handleiding - Pagina 7

Blader online of download pdf Originele handleiding voor {categorie_naam} Gage Bilt GB55B. Gage Bilt GB55B 16 pagina's. Pneumatic installation tool

When the actuator assembly (1) (510127) is depressed, the pressurized air inside the tool is directed to the front side of the piston

(3) (510101) thus moving it to the rear of the cylinder assembly (2) (510121), forcing the air from the back side of the piston (3)

(510101) to be exhausted from the side of tool. The internal components of the attached nose assembly are also simultaneously

moving with the piston (3) (510101) to start the fastener installation. When the fastener installation is completed, the actuator

assembly (1) (510127) is released directing the air to the back side of the piston (3) (510101) reversing the sequence.

Piston in forward position

Air is exhausted through the standard exhaust port on the side of the tool. To redirect air exhaust to rear of tool, remove plug (401816)

from rear exhaust hole. If changing exhaust back to side, we recommend applying Vibra-tite® to plug (401816) before installation.

STANDARD

EXHAUST

(Side of tool)

OPTIONAL

EXHAUST

(Rear of tool)

GB55B S/N: 1014 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

PRINCIPLE OF OPERATION

Air exhaust

AIR EXHAUST

Air is exhausted through

Standard Exhaust Port

on side of tool.

Air is exhausted through

Rear Exhaust Port

Images may not reflect actual tool

Piston in rear position

Rear Exhaust Port

Rear Exhaust Port Plug

removed. Side port plugged.

Air exhaust

Plugged

Rev. 1/23