Gage Bilt GB735 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gage Bilt GB735. Gage Bilt GB735 20 pagina's.

When the actuator lever assembly is depressed, the pressurized air inside the tool is released allowing spring pressure to move the

valve spool assembly, causing the air to be redirected. The air is directed to the top side of the air piston assembly, moving it in a

downward direction. The air below the air piston assembly is then directed through the valve sleeve and exhausted out of the bottom

of tool. Simultaneously, the piston rod assembly connected to the air piston assembly is also moving down, forcing hydraulic oil up

and into the front side of the head cylinder assembly, causing the piston to move to the rear of the head cylinder assembly. The oil from

the rear of the head cylinder assembly is directed to the top of the piston rod assembly inside the power cylinder. The internal

components of the attached nose assembly are also moving with the piston to start the fastener installation. When the fastener

installation is completed, the actuator lever assembly is released. Air pressure is then built up inside of the handle assembly causing the

valve spool assembly to return to its original position and reversing the sequence.

PULL Cycle

Piston Rod Assembly

moves down

Air Piston

moves down

GB735 INSTALLATION TOOL

PRINCIPLE OF OPERATION

Piston Rod Assembly

moves up

Air Piston

moves up

Air exhaust

Pressurized Oil

Pressurized Air

Unpressurized Oil

Unpressurized Air

Images may not reflect actual tool

RETURN Cycle

Air exhaust

REV. 12/22