Gage Bilt GB54B Originele handleiding - Pagina 11

Blader online of download pdf Originele handleiding voor {categorie_naam} Gage Bilt GB54B. Gage Bilt GB54B 16 pagina's. Pneumatic installation tool
Ook voor Gage Bilt GB54B: Gebruikershandleiding (9 pagina's)

Pagina afdrukken
Gage Bilt GB54B Originele handleiding
Providing all maintenance conditions have been met, follow this systematic approach to diagnosis.
1. MORE THAN ONE PULL IS REQUIRED TO BREAK FASTENER WHEN THE ACTUATOR ASSEMBLY (510127) IS DEPRESSED.
a) Jaws are stripped or packed with chips. Clean or replace.
b) Incorrect nose tip.
2. FASTENER STEM JAMMED IN NOSE ASSEMBLY.
a) Nose assembly components require service.
and disassemble. Replace worn or broken parts. Clean the surface the jaws ride on.
b) Stems lodged side by side in the follower. Disassemble, remove stems, and reassemble. (See proper nose assembly data
sheet for detailed instructions).
c) Incorrect follower.
GB54B S/N: 1088 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

TROUBLESHOOTING

DISCONNECT AIR FROM
11
TOOL, remove the nose assembly from the tool
Rev. 10/22