Hi Sharp HS-CW8000 Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hi Sharp HS-CW8000. Hi Sharp HS-CW8000 3 pagina's.

Pagina afdrukken

Thank you for purchasing our product.

Please read this User's Manual before

using the

product.

Change without Notice

White Light LED + IR + Motion detected

1. Intelligent camera supported motion detection system with

white light and IR LED

2. Unlike other general IR cameras which can only present

B/W image at night, exclusively design as a motion

detection system to activate the white light LED within

camera lens range distance in color image

3. Power saving control, also it can be an auxiliary lighting

and warning purpose

SAFETY PRECAUTIONS

Please read before using

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of insulated dangerous Voltage within the

product's enclosure that may be sufficient magnitude

to constitute risk of electrical shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operation and maintenance (servicing) instructions in

the literature accompanying the appliance.

Please read the service manual in details before using.

Don't try to disassemble the chassis or the part easily , in case

that touch the power by mistake , is shocked by electricity the

danger or caused inside parts to be damaged ,

This product is a IP- 67 waterproof camera。

Do not attempt to service this unit yourself unless you are

authorized to do so. Opening cover may exposure you to

dangerous voltage or other hazards. Refer all servicing to

qualified personnel only.

When being regular, please lock the parts firmly first to prevent

the machine damage.

Please connect correctly in accordance with the regulation,

prevent the machine from using , or striking improperly.

Please don't use any organic solution or the corrosively sanitizer

to insert and wipe away the chassis outside . While inserting and

wiping away, please turn off the power, and use the clean cloth is

stained with letting a small amount of branch water, insert and

wipe away appearance.

Please don't use the camera under the following abominable

environments:

Temperature

Centigrade, or is higher than +50 degrees Centigrade.

3D Free Angle Camera

lower

than

-10

degrees

CONTENT TABLE

CONTENT TABLE..................................................................... 2

SAFETY PRECAUTIONS.............................................................. 3

FUNCTION.............................................................................. 4

SENSOR ..................................................................... 4

LENS .......................................................................... 4

IR LENS ....................................................................... 4

Power and Video Output Jack.......................................... 5

INSTALL STEP........... .............................................................. 7

SPECIFICATIONS ..................................................................... 9

DIMENSION.............................................................................. 10

IR & White light active...................................................................11

FUNCTION

The camera includes auto white balance mode(AWB)，auto capture

color temperature. The range is 2400°K~9400°K。

SENSOR：Auto Cell Device Sensor, the IR LED would on when night

comes to make up lightness. IR LED would not on in the day,

to reduce power consumption. Illumination is 8 LUX (LED on)

/ 9LUX(LED off)。

Sensor

LENS：Super sensitivity sensor IRIS (BOARD LENS 6.0mm)

LENS

LED : IR LED x 12, angle 35˚ / White light LED x 8, angle 30˚

White light LED

IR LED