5th Wheel M2 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 5th Wheel M2. 5th Wheel M2 18 pagina's.
Ook voor 5th Wheel M2: Montagehandleiding (19 pagina's)

Pagina afdrukken

8 Indication Description

LED Power Indication

Each LED indicator represents 20% of power. When the battery power is below 10%, M5 ﬂashes.

>80%

>60%

M1-M5 light up

M3-M5 light up

Cruise Control Indication

Turn On

When the cruise control is turned on, the indicator light

will stay on.

T3 lights up

Headlight Indication

Turn On

When the headlight is turned on, the indicator light will

stay on.

T1 lights up

Gear Indication

Gear 1

Gear 1 is enabled.

T6 lights up， T7 & T8 go out

T7 lights up， T6 & T8 go out

>40%

>20%

M4-M5 light up

M5 light up

Turn Oﬀ

When the cruise control is turned oﬀ, the indicator light

goes out.

T3 goes out

Turn Oﬀ

When the headlight is turned oﬀ, the indicator light goes

out.

T1 goes out

Gear 2

Gear 3

Gear 2 is enabled.

Gear 3 is enabled.

T8 lights up， T6 & T7 go out

Error Indication

If there is anything abnormal about the scooter, the warning indicator will ﬂash, with the ﬂashing

<10%

value E1-E6 displayed.

M5 ﬂashes

Errors

Code

Communication

Fault

Brake failure

Throttle Failure

Motor Fault

Controller failure

Overheated Motor

Over-speed alert

Flashing

Solutions

Please check whether the taillight is on. If it is oﬀ, it means that the power supply is insuﬃcient.

Please replace the controller or the LED display. If it is on, please check whether the connecting

wire between the controller and the LED display is open-circuit.

Press and release the brake to reset the brake.

f not, please check whether the

Please check whether the

connecting wire between the

brake is pressed.

brake and the LED display is

short-circuited or open-circuit.

Press and release the throttle to reset the throttle.

If not, please check whether the

Please check whether the

connecting wire between the

throttle is pressed.

throttle and the LED display is

short-circuited or open-circuit.

If it is not connected correctly, please adjust and connect the motor and the

controller correctly.

If it is connected correctly, please disconnect the connecting wire

Check whether the motor

and measure whether the internal resistance between the

and controller wire is

three-phase wires of the motor is within a reasonable range,

connected correctly.

generally within 0.1Ω-1Ω. If it exceeds the range, the motor needs

to be replaced.

If the controller is damaged, please replace the controller.

If the motor temperature is too high, please wait for the motor to

cool to the appropriate working temperature.

Check whether the motor

If the motor temperature is normal, check whether the connecting

temperature is too high.

wire of the controller is short-circuited. If it is short-circuited,

please replace the connecting wire.

Reduce the riding speed.

If it is open-circuit or short-

circuited, please replace the

connecting wire.

Replace the brake handle.

If it is open-circuit or short-

circuited, replace the connecting

wire.

Replace the throttle.