Dyna-Glo RMC-11-C7 Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dyna-Glo RMC-11-C7. Dyna-Glo RMC-11-C7 16 pagina's. Portable kerosene-heater
Pagina afdrukken
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
13
. Sung 4 wing nuts on the
mounting stud, but do not
tighten.
16
. Check for correct clearance
between wick holder and draft
tube. It should be the same all
around.
19
. Replace the Cabinet & Grill
assembly and fasten to the
heater with 3 screws.
Be sure to check that the wick is
set at the correct height of
5/6"(8mm) after reassembling
the heater.
14
. Raise the wick the full "up"
position, and evently tighten
wing nuts in several steps.
17
. Check the function of safety
shut-off mechanism by
pushing the extinguish button
to upset the pendulum.
11
15
. Check height of wick.
It should be 5/16" above collar
18
. Reinstall the wind cover.