GREAT ARBOR GAC-252 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} GREAT ARBOR GAC-252. GREAT ARBOR GAC-252 20 pagina's. Wi-fi dial up router

G E T T I N G

S T A R T E D

Click the Wireless Security tab in the lower section to set encryption. The most secure

form of encryption is WPA2-PSK and the key can be a mixture of characters and letters.

If your device does not support WPA2-PSK, you can set the encryption to WEP.

However in the case of WEP, the key has to be

Save & Apply

the entries, click

For increased security, you can change the password for the router. Select

Administration

then

Figure 7 Admin Password Configuration Page

Optional: Scheduled Dial Up

The router can be configured to make a dial up connection at particular times of the day,

week, or month and the duration of the connection can also be specified. In order to

create a schedule, first set the TimeZone by clicking on the System Tab, selecting the city

in the same time zone as you desire and then clicking Save & Apply. Next, click on the

Services Tab and then on Scheduled Tasks. Type in the scheduled dialup command

(crontab) in the box (see examples below) and then click Submit. After that turn the

power off and then on to the router to enable the schedule. Note that the router does

not have a real-time clock and gets set with the correct time only after it connects to the

Internet after power on. So if power is lost then the router will reset to the factory set

time and the configured schedule will be affected till the router dials up for the first time.

A crontab file has five fields for specifying the schedule:

* * *

- - -

| | |

| | +----- day of week (0 - 6) (Sunday=0)

| +------- month (1 - 12)

+--------- day of

+----------- hour (0 - 23)

+------------- min (0 - 59)

* means all values (i.e all days or all months, etc.); ? means omit the specification

. Put in the new password, confirm it and click

command to be executed

month (1 - 31)

exactly 10

characters. After making

System

Save & Apply

and