Hi-Force HPP Series Gebruiksaanwijzing - Pagina 4
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Hi-Force HPP Series. Hi-Force HPP Series 16 pagina's. Petrol driven hydraulic pumps
Pagina afdrukken•
Only use hydraulic tools/cylinders in a complete and tested, coupled system. NEVER attempt to use
a tool/cylinder that is not correctly coupled to its operational pump. NEVER pressurise an uncoupled
coupler/s.
•
NEVER attempt to disconnect a hose from a hydraulic system until the systems pressure has been
completely released. Doing so can result in that pressure becoming trapped within the system and
relieving trapped pressure can be dangerous.
•
NEVER try to relieve trapped hydraulic pressure in the system by loosening or attempting to remove
the coupler. Trapped hydraulic pressure can cause a loosened coupler to dislodge unexpectedly with
great force. This action could result in serious personal injury or death, as the coupler could become
a projectile and hit operatives in the working area.
•
Loosening a coupler under pressure can result in the escape of hydraulic oil at high pressure, which
can penetrate the skin and cause significant injury or death.
•
NEVER use a hammer and punch to unseat a coupler check valve that is under pressure. Doing so
could result in the sudden, uncontrolled release of hydraulic oil at high pressure, which could cause
significant injury or death.
•
Immediately replace any worn or damaged parts using genuine Hi-Force parts only.
•
DO NOT remove any labels from the product. Replace any damaged or unreadable label
immediately.
•
NEVER lift or carry any hydraulic components by the hose or hoses connected to them.
•
Avoid damaging hydraulic hose. ALWAYS route hoses to ensure that they are free from sharp bends
and kinks. Using a bent or kinked hose will result in severe back-pressure, which can lead to hose
failure.
•
ALWAYS operate the system under no-load conditions before the actual operation, to ensure there
is no air trapped in the hydraulic circuit.
•
Servicing of hydraulic equipment must only be undertaken by a qualified technician.
Failure to observe and obey the following safety precautions could result
in property damage, equipment damage or minor/moderate personal injury;
•
DO NOT
drop or place heavy objects on a hydraulic hose, as this may cause
internal damage, which could result in rupture of the pressurised hose. A
ruptured hose could cause significant damage to components and possible
severe injury to personal operating nearby.
Operating Instruction Manual:
OM-HPP-01
4
From Serial Number:
ALL