Great Lakes GL24SRD Handleiding voor installatie-instructies - Pagina 11
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Great Lakes GL24SRD. Great Lakes GL24SRD 12 pagina's. 19" eia srd swing rack
Ook voor Great Lakes GL24SRD: Handleiding voor installatie-instructies (8 pagina's)
Pagina afdrukken
POWER
When using PDUs, each PDU should be connected to a committedbranch
circuit that is rated for the continuous load of all the equipment connected.
When not using a PDU, each piece of equipment should be connected to a
dedicated branch circuit.
PROTECTIVE EARTHING/GROUNDING
A main protective earthing stud is provided.
WARNING: To avoid injury to persons or loss of life, ground each Swing Rack
individually to the dedicated branch circuit earthing ground
CONNECTING MAIN PROTECTIVE EARTHING STUD TO THE DEDICATE D
BRANCH CIRCUIT EARTHING GROUND CONDUCTOR
Connect the dedicated branch circuit earthing ground conductor to the main
protective earthing stud located on the support frame using a listed ring or
closed-loop terminal.
When installing a Great Lakes Swing Rack or Wall Mount to materials such
as wood, cinder block, concrete, etc., please consider the load capacity
within the swing rack or wall mount structure, and be certain to check with
local authorities to determine the appropriate hardware requirements
for these conditions. Because wall compositions may vary at different
installation sites, Great Lakes cannot warrant the fitness or suitability of
any installation instructions or installation hardware it may provide for
swing rack or wall mount enclosures. Great Lakes hereby DISCLAIMS
ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, REGARDING THE SUFFICIENCY, FITNESS OR SUITABILITY OF
ANY INSTALLATION INSTRUCTIONS OR INSTALLATION HARDWARE
GREAT LAKES MAY PROVIDE FOR SWING RACKS AND WALL-MOUNTED
ENCLOSURES. Great Lakes recommends that an experienced maintenance
and/or technical person be consulted regarding the proper wall-mounting
hardware and procedures to be used for the anticipated load capacity of
the swing rack or wall mounted enclosure.
Product specifications are subject to change without prior notice.
11