Great Lakes GL24SRD Handleiding voor installatie-instructies - Pagina 3
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Great Lakes GL24SRD. Great Lakes GL24SRD 8 pagina's. 19" eia srd swing rack
Ook voor Great Lakes GL24SRD: Handleiding voor installatie-instructies (12 pagina's)
Pagina afdrukken
OVERVIEW
SRD Swing Racks are designed to securely hold 19" rack mount
equipment, networking equipment, phone equipment, etc. in tight spaces
or closets
Your package should include the folowing items:
COMPONENT
BRACES (TOP & BOTTOM)
SWING RACK SIDE WITH SWING FRAME ATTACHED
SWING RACK SIDE
1/4 - 20 X 1/2" CARRIAGE BOLTS
1/4 - 20 HEX NUTS WITH SERRATED FLANGE
3/8" - 16 SHOULDER BOLTS
#10-32 X 1/2" LONG, BLACK SCREWS
TOOLS REQUIRED: 7/16" NUT DRIVER, PHILLIPS HEAD
SCREWDRIVER
MOUNTING INSTRUCTIONS
Wood Studded Wall
Once the location on the wall has been determined, inspect the wall
surface. The wall must be flat and square in the horizontal and vertical
plane to ensure the SRD Swing Rack closes correctly. If the wall is not
flat and square, you might need to use shims.
Wood studded wall mounting instructions apply to a 2" x 4" wood stud
wall with ¾" plywood.
Mounting Hardware for Wood Studded Wall
GL24SRD
GL36SRD
GL48SRD
Masonry Wall Surface
For a masonry wall surface, the installer must provide all the appropriate
hardware.
WARNING: Improper handling and use of the EN enclosure could result in
equipment damage, serious injury, or possible death.
Qty (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
Qty (8) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
Qty (8) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
QTY.
2
1
1
8
8
2
50
3