6K Products DH0600 Bedienings- en onderdelenhandleiding - Pagina 2

Blader online of download pdf Bedienings- en onderdelenhandleiding voor {categorie_naam} 6K Products DH0600. 6K Products DH0600 17 pagina's. Connect and cut hydraulic chain

Pagina afdrukken

⇒

The unit you have purchased may require you to install additional guarding to meet State and

Federal safety requirements.

⇒

Do not move the log when it is being cut or when the saw is down. This action may damage the

bar, chain or other components or could cause bodily harm or injury.

⇒

The log must be clamped before cutting. The bar, chain or other components could be damaged.

You could suffer bodily harm or injury.

⇒

Do not make repairs or adjustments to this product other than those listed in this manual except

when directed to do so by 6K Products.

⇒

All persons working near this machine must wear eye protection and hearing protection.

⇒

Use extreme caution around the cutting chain. It is sharp and may cause bodily harm or injury.

⇒ Petroleum products are used with this product. Use appropriate caution when operating or

servicing. These products are flammable and may cause eye or skin irritation.

⇒ Always use 6K Products approved parts when making repairs. Replacement parts must meet or

exceed the specifications of the original equipment manufacturer.

⇒ The information in this manual is subject to change without notification.

⇒ This manual is intended for safe operation and maintenance of the 6K Products, 10G24 Connect

and Cut Hydraulic Chain Saw. 6K Products, welcomes any and all suggestions on how to improve

this manual or the 10G24 Connect and Cut Hydraulic Chain Saw.

SAFETY PRECAUTIONS