Great Lakes WR2 Handleiding voor installatie-instructies - Pagina 3

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Great Lakes WR2. Great Lakes WR2 8 pagina's. Ul60950-1/ul2416 e series equipment cabinet/rack

Pagina afdrukken

INSTALLATION

Receiving and Unpacking

Inspect and report any damage before receiving. Unpack the wall

mount by carefully removing the corrugated carton and corners. Avoid

damaging the wall mount when removing packaging.

WARNING: Only trained service personnel should be used to unpack

and move the enclosure. Also, be sure you have a sufficient number of

service personnel. Do not attempt to move enclosures by yourself.

WARNING: Be careful when moving enclosures before installation.

Sudden stops and starts, excessive force, obstructed routes, and

uneven floor surfaces may cause the enclosure to topple over.

Loading Equipment

WARNING: Only install equipment after the Great Lakes WR Wall

Mount has been properly secured. Do not move the Great Lakes WR

Wall Mount assembly while loaded.

To maintain a uniform distribution of the mechanical load in the WR,

load the heaviest equipment first, at the bottom and load the lighter

units at the top. Rated or maximum load capacities for the Great Lakes

WR Wall Mounts are as follows: WR2: 50 lbs., WR4: 75 lbs.

SERVICE

The Great Lakes Wall Mount should be repaired by personnel trained

by Great Lakes, or returned to Great Lakes for repair or replacement.

Contact Great Lakes Technical Support at 814.734.7303 or at

greatcabinets.com

GENERAL INFORMATION

WR2: 4"H x 19.75"W x 21.63"D, 2 RMU

WR4: 7.5"H x 19.75"W x 21.63"D, 4 RMU

Certifications: UL Listed 2416 and UL 60950-1

Construction: Steel

Finish: Black Textured Powder Coat

Grounding: Studs on inside back panel

Rail Type: Tapped #10-32