Gaggenau VG 231 234 AU Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gaggenau VG 231 234 AU. Gaggenau VG 231 234 AU 12 pagina's.
Pagina afdrukkenTrouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
Fault
Malfunction of the gen-
eral electrical system.
The electric ignition
does not work.
The burner flame is not
uniform.
The gas flow is not nor-
mal or there is no gas.
The kitchen smells of
gas.
The burner goes off
after ignition.
Possible cause
The household fuse has tripped.
There may be food or cleaning products stuck
between the ignition sparkers and the burners.
The burners are wet.
The burner caps are not correctly positioned.
Power cut
The burner components are not correctly posi-
tioned.
The grooves on the burner are dirty.
The gas supply is blocked via gas taps.
If the gas is supplied from a gas cylinder, check
that this is not empty.
There may be a leak in the gas cylinder coupling. Check that the coupling is sound.
The control knob was not held down for long
enough.
The grooves on the burner are dirty.
DO NOT MODIFY THIS APPLIANCE.
Solution
Check the fuse box if the fuse has tripped.
The space between the ignition sparker and the
burner must be clean.
Dry the burner caps carefully.
Check that the burner caps are correctly posi-
tioned.
Ignite the burner with a lighter or a match.
Ensure the components are correctly posi-
tioned.
Clean the grooves on the burner.
Open all gas taps.
Change the gas cylinder.
Once the burner is on, hold the control knob
down a few seconds longer. Fully press control
knob.
Clean the grooves on the burner.
9