Daxten Voyager 300 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Daxten Voyager 300. Daxten Voyager 300 8 pagina's. Kvm extender up to 100 or 300m
Ook voor Daxten Voyager 300: Gebruikers- en installatiehandleiding (16 pagina's), Brochure (2 pagina's)

Pagina afdrukken

Cable Requirements

Cables to connect the Voyager Local unit to your PC's system unit are supplied in the package. Your

keyboard, monitor and mouse will plug straight in to the Voyager Local and Voyager Remote Units.

The Voyager 300 is a dual access unit, in that it allows for an access point next to your computer as

well as access point up to 350m away.

The UTP / STP interconnect cable to connect the Voyager Local Unit to the Voyager Remote Unit is

not supplied with the Voyager units. If you do not have suitable CAT 5, 5E or 6 UTP or STP cable

fitted at you site, please consult your dealer.

The Local and Remote Units are connected by industry standard structured cabling (Category 5, 5E or

6 UTP/STP, 4-pair) terminated with RJ45 connectors.

The cable used should be solid trunk cable. Stranded patch cable will give poor results over longer

distances.

The connector wiring must meet the EIA/TIA 568 standard.

CAT5 Wiring Scheme

The Local-Remote interconnection cable is terminated in RJ45 connectors and should be wired

according to the EIA/TIA 568 (Scheme B preferred) industry standard. The Voyager will function with

other wiring schemes, but the video quality may be impaired.

Orientation: Looking into the RJ45 socket pin 1 is on the left and Pin 8 on the right.

Wire Colour

White/Orange

Orange/White

White/Green

Blue/White

White/Blue

Green/White

White/Brown

Brown/White

The Voyager has been tested with all major makes of CAT 5 cable including BICC-VERO, Mohawk,

and Brand-Rex. The Voyager has also been tested with most major makes of CAT 5E and CAT6 with

good results.

That failure to wire the twisted pairs correctly will impair the video quality

Note:

dramatically and / or prevent correct operation.

This Voyager 300 extender is designed for use up to a maximum cable length of 350m/1200ft. Up to

100m the max. resolution should be at 1600 x 1200 @ 85Hz. At a length of 300m the video quality

should still be acceptable even at a screen resolution of 1024 x 768 (85Hz). With cable distances of

300m and over you may require a skew compensator (1024-00SE) this will depend on the quality of

your CAT 5 or CAT 6 cable and or monitor resolution.

Although a single continuous length of interconnect cable is preferable, operation is possible through

multiple Patch Panels. However, the more patch panels the cable is routed through, the greater the

chance of video signal degradation.

Wire

Pair