Gaggenau VG 232 AU Instructieboek - Pagina 16

Blader online of download pdf Instructieboek voor {categorie_naam} Gaggenau VG 232 AU. Gaggenau VG 232 AU 19 pagina's. Built-in gas cooktop
Ook voor Gaggenau VG 232 AU: Instructieboek (19 pagina's)

Pagina afdrukken

7.3 Nozzle replacement

Fig. 10

See table on Page 12 for details of nozzle

settings.

All manuals and user guides at all-guides.com

Changing over to a different gas type

Only authorised specialists are permitted to

change over to a different gas type.

The nozzles needed for the gas type to be set

are available as a conversion kit. Please specify the

appliance type and the required gas type.

Nozzles can be replaced without having to open

the housing.

Loads for all gases

For all gas types and pressures, the rated load

is achieved by installing the high and low setting

nozzles for the required gas type (see nozzle

table).

The low setting nozzle is screwed in fully at the

works, and so the lowest quantity is set.

Replacing the low-setting nozzle 1

Proceed as follows:

– Disconnect the appliance from the power

supply!

– Remove the cover from the underside of the

appliance under the gas valves.

The low-setting nozzle 1 is located in the gas

valve and is screwed in from below. (see Fig. 10)

– Unscrew the nozzle and insert the new nozzle as

specified in the low-setting nozzle table. The

nozzle must be screwed in fully. Fit the cover

cap again.

If it should be necessary to correct the low-setting

nozzle 1 as the result of deviating gas types and

pressure, the flow rate can be increased by turning

to the left.