Gaggenau VI424 Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gaggenau VI424. Gaggenau VI424 20 pagina's. Induction wok
Ook voor Gaggenau VI424: Gebruiksaanwijzing (16 pagina's)

Gaggenau VI424 Gebruiksaanwijzing
4
To confirm and start the short-term timer, tap the
touch key Š. Expiry of the duration begins
automatically if you do not confirm within 15
seconds.
A signal sounds and the duration visibly elapses
in the display.
Even after the cooking position has been switched off,
the short-tem timer continues to run until the set
duration has elapsed.

After expiry of the duration

An audible signal indicates that the set duration has
elapsed. The indicator flashes slowly. Tap the touch
key Š. The indicator and the audible signal go off.
The audible signal goes off after three minutes. The
indications ‹‹ and Š continue to flash until the touch
key Š is tapped or the control knob is operated.

Correcting the duration

Tap the touch key Š and set the duration again.
1
Tap the touch key Š again to activate the altered
2
duration.

Ending prematurely

Tap the touch key Š , change the duration to ‹‹ and
confirm it.
Tip:
If you press the touch key Š for a prolonged time, the
remaining duration is cleared and ‹‹ is displayed.
12

Safety shut-off

For your protection, the appliance has a safety shut-off
feature. Depending on the set power level, heating is
switched off after a certain time if nothing is operated
during this time.
Power level
Switching off after
1 to 6
4 hours
7
3 hours
8 and 9
2 hours
10 to12 and booster
1 hour
function
An audible signal indicates when the duration has
elapsed. The cooktop indicator goes continues to light
up permanently. The illuminated ring behind the
activated control knob flashes fast.
Turn the control knob to 0. You can then operate the
appliance in the way to which you are accustomed.

Overheating protection

If it overheats, the appliance automatically controls
the cooktop's power to protect the electronic
components.
Slight overheating: the appliance reduces the power
level. As soon as the cooking position has sufficiently
cooled down, the chosen power level is automatically
used again. An audible signal indicates that all power
levels are available again.
Extreme overheating: the cooking position is
switched off automatically. An audible signal sounds.
The fault indication •or "... appears in the short-term
timer's display. The illuminated ring behind the control
knob flashes fast.
Remove the cookware from the cooking position.
The cooking position has cooled down sufficiently
once the fault indication has gone out and a
signal sounds.
Set the control knob to 0. Then set the required
power level in the manner to which you are
accustomed.