hi-Fun hi-Cigarette Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} hi-Fun hi-Cigarette. hi-Fun hi-Cigarette 17 pagina's.

to your preferences. Make sure you select a voltage

compatible with the resistance (ohms) of the cartomizer

times on a rapid sequence. LEDs (2) will turn on with three

different colors, each indicating a voltage:

Red: low voltage (3.0 V)

Purple: medium voltage (3.5 V)

Blue: high voltage (4.0 V)

3) Battery charging and replacing

hi-Cigarette is equipped with a rechargeable lithium-ion

650mAh battery provided with an electronic control unit

for charging and protecting it.

When battery is low, by pressing the button (1) to

vaporize, multifunction LED blinks 3 times and hi-Cigarette

switches back to stand-by mode. The cartomizer heating

If this happens, battery needs to be recharged or replaced

with a charged one.

To recharge the battery, only use the charger provided.

Screw the battery (6) to the charger (7) without over-

tightening it and connect the USB plug to your computer

or to a wall charger. While on charge, a red LED on the

charger lights on and the power bar LEDs (3) start showing

charge is in progress. When charging is complete, LED on

the charger becomes green and LEDs on hi-Cigarette turn

off. From now on, hi-Cigarette is ready for a new use.

When autonomy of hi-Cigarette evidently reduces, it is

time to replace the battery. It can be purchased as an

original hi-Fun spare part.