Active Storage ActiveSAN Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Active Storage ActiveSAN. Active Storage ActiveSAN 12 pagina's.

ActiveSAN Management Software |

Hardware Setup

The ActiveSAN appliance hardware comes pre-configured; the operating system, file system, and other

necessary software is preloaded. Depending on your configuration, you may also have client software,

which may need to be installed. If so, follow the instructions included with the client software to

accomplish this.

Once your ActiveSAN appliances have been physically installed, you will next need to provide power

and network connections. Each ActiveSAN appliance has redundant load-balancing power supplies for

maximum resiliency. Always follow common practices for supplying power to the ActiveSAN appliances.

ActiveSAN appliances utilize auto-switching power supplies and can accommodate 110V – 220V input. It

is highly recommended that the appliances be connected to uninterruptable power sources (UPS). If there

is any question about specifications on input power, please contact Active Storage Technical Support.

Before Setting up your SAN you will need the following equipment:

At least one SAN compatible Fibre Channel-connected RAID system with the capability to host

a SAN volume and Metadata volume

One Pair of ActiveSAN appliances in a 4-post equipment rack

One or more SAN clients – either Xsan or StorNext

Fibre Channel infrastructure:

Fibre Channel HBA (Host Bus Adapter) in each client

Fibre Channel switch

Fibre Channel cables

Ethernet infrastructure:

Private network for Metadata

Public network for intranet and internet access

Optionally a LOM (Lights Out Management network)

Ethernet cables

Quick Start Guide

ActiveSAN Management Software | Quick Start Guide 2011 - V.1