Hi-ltte Rambo 230 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hi-ltte Rambo 230. Hi-ltte Rambo 230 9 pagina's. 7r 230w moving head beam

Pagina afdrukken

1. Menu Operation

SAFETY TIPS

◇Before using this product, please observe carefully the product is not unwrap or damage during transportation.

As a result of damage during transporting , please do not use the lights, and contact with the dealer or manufacturer. ◇

Before running products, to ensure that the voltage and Hertz in accordance with the requirements of lights.

◇It's very important, connecting ground wire to avoid the electric shock.

◇This product is for dry indoor environment.

◇This product must be installed on the sufficient space, adjacent to interface the shortest distance of 50 cm, to ensure that

the lights will not crash each other.

◇Before moving or repairing the product , please unplug the power. ◇When it

working, ensure that no inflammable and explosive near objects.

◇When installing this product, please use the safety rope. When handling this product, lift the armrest base, rather than the

lamp body.

◇This product is suitable for a maximum temperature of 35 degrees Celsius, when the surrounding environment is higher than 35

degrees Celsius, please do not use this product.

◇Do not touch. When working, the product running very fast, to prevent bruising hands.

◇Problems happens when operating performances, should immediately stop using the lights. Do not carry out

maintenance, repair damage caused or likely to cause other problems.

Please contact the company's maintenance repair. During the repair process, use the same type of accessories.

◇Please read the instructions carefully, especially regarding the installation, using, maintenance parts. Important that the lighting in the

transport process, must be packed anti-shock protection carton or flight case

Please read the guide book, the guide book

that contains the installation, use and

maintenance of important information

◇DMX Channels:16CHs

◇Control model:DMX512,auto models ◇Blue

LED LCD and rotating button control ◇

OSRAM SIRIUS HRI 230W ( 230 Beam )

◇XYmotos:Ultra-quiet andultra high-speed three-phase

motor

◇ Color temperature is 8500K,span life time is

2000Hs ◇14 colors+white,half color effect

◇17 fixed gobo+open circle

◇8-facet prism:prism can be rotated counter-rotating,

beam effect can be opened and closed

◇Optical lens： Precision cemented optical

lens ◇Frost effect： Adjustable soft spot angle

◇Fpcus：linear focus

◇Dimmer：0-100% linear dimmer

◇Beam angle：0-3.8° parallel beam

Extended features: support disconnecting the

power supply, the display panel set up address

code (had to pre-equipped with batteries).

TECHNICAL PARAMETERS

◇Strobe：Two pieces strobe(0.5-9F.P.S)

◇Motors:13 Ultra-quiet motors, two piece3-phase motors，16bit

◇Housing：high temperature alloy plastic with Die-cast handle

◇IP rate：IP20

◇N.W:15.2KG ◇

Size:355*300*484mm

278mm