Great Little Trading L5125 Snelstarthandleiding - Pagina 4
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Great Little Trading L5125. Great Little Trading L5125 7 pagina's. Blake cube storage - bench
Pagina afdrukken
#1
#1
#1
C
#3
#2
#2
#3
A
STEP 1:
Working on a protective surface like a carpet or rug, position both side
panels A & B with drill holes facing up.
Using a phillips screwdriver, insert 2x cam dowels (#3) into the holes in the
corners of BOTH panels, then insert 2x 20mm wooden dowels (#2) into
the holes next to them.
Now take 2x support bars C and attach them to panels A & B using 3x
18mm wood screws (#1) on EACH bar.
Hardware for Step 1:
6x #1 Wood Screws (18mm)
4x #2 Wooden Dowels
4x #3 Cam Dowels
#1
#1
#1
C
#3
#3
#2
#2
B
Hardware for Step 2:
4x #2 Wooden Dowels
4x #3 Cam Dowels
STEP 2:
Prepare the top panel D by inserting 4x cam dowels (#3) and 4x 20mm
wooden dowels (#2) into the holes as shown.
#4
E
E
STEP 3:
Orientate top panel D so that the grooved edge is on the floor.
Take both vertical divider panels E and connect to top panel D along the edge
with the larger drill holes as shown.
When in place, insert 2x cam locks (#4) into the large holes on BOTH panels
4
E and turn clockwise to secure.
#3
#2
#3
#2
#2
#3
#2
#3
D
Using Cam Locks:
When inserting into the
panel, ensure that each cam
lock's arrow is pointing
D
#4
towards the drill hole on
the side edge of the panel
& the dowel that it will be
receiving.
When the panels are in the
#4
connected position, using a
screwdriver, turn the cam
lock in a clockwise direction
to lock and secure.
#4
Hardware for Step 3:
4x #4 Cam Locks