Great Little Trading Paddington L5485 Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Great Little Trading Paddington L5485. Great Little Trading Paddington L5485 6 pagina's. Desk
Pagina afdrukken
F
E
BACK
#3
#3
#3
#3
#3
#3
#3
BASE
STEP 4:
Carefully place desk top panel C onto side panel B as shown. Ensure the large drill
holes on panel C are facing inwards.
When all hardware is aligned with the corresponding holes, push into place. Now
insert 4x cam locks (#3) into the large holes by the join and turn clockwise to secure.
Next take desk top support bar (D) and with the large drill holes facing to the back,
align and connect with panel B as shown. Insert 2x cam locks into the large holes on
the back of the panel and turn clockwise to secure.
Finally take the joined E/F panels and align/connect with the remaining hardware on
panel B at the base end. Then insert 4x cam locks on the back of these panels and
turn clockwise to secure.
Hardware for Step 4:
TOP
10x #3 Cam Locks
Using Cam Locks:
When inserting into the
D
panel, ensure that each cam
C
lock's arrow is pointing
towards the drill hole on
the side edge of the panel
& the dowel that it will be
receiving.
When the panels are in the
connected position, using a
#3 #3
screwdriver, turn the cam
lock in a clockwise direction
to lock and secure.
#3
#3
B
#3
STEP 5:
How take remaining side panel A and position over the desk aligning all the
hardware with the corresponding holes on the receiving panels. Push into place
ensuring all points are connected.
Now insert 10x cam locks (#3) into the holes on the upper ends of panels C, D, E
& F and turn clockwise to secure. Please ensure all 10 cam locks are inserted and
tightened.
#3
#3
#3
#3
#3
#3
#3
Hardware for Step 5:
10x #3 Cam Locks
5
A
F
#3
#3
D
E
#3
#3
#3
C