Gaggenau AI260190 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gaggenau AI260190. Gaggenau AI260190 16 pagina's. Island ventilation hood

Cleaning and care

The grease filter saturation display F flashes after

an operating time of 30 hours to you indicate to you

that you should clean the grease filter. The grease

filters can of course be cleaned at any time, even if

the grease filter saturation display has not started

to flash.

The stainless steel grease filters can be

removed easily for cleaning:

Disconnect the power supply (switch off the

fuse).

Grip the grease filter handle and push the slide

towards the rear. Then pull the grease filter

downwards out of the holder; repeat the

operation for the other grease filters.

You can clean the stainless steel grease filters

in a dishwasher at a maximum temperature of

65°C, where it should be supported vertically

to allow food or rinsing residues to drain off.

If possible, the inner parts of the housing should be

wiped out in hot rinsing water when replacing the

filters.

Caution:

when cleaning the inside of the housing, beware of

protruding parts..

After having cleaned them, re-insert the grease

filters in the extractor hood in reverse order.

Important:

the handles of both grease filters must be visible

after assembly.

Press the F key to set the elapsed hours counter to

zero. Flashing of the indicating lamp goes off.