Hi-Spec DT40235 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hi-Spec DT40235. Hi-Spec DT40235 7 pagina's. 0-15-30w soldering iron set

double insulation system which satisfies OSHA requirements and complies with the

applicable standards of Underwriters Laboratories, Inc., the Canadian Standard

Association, and the National Electrical Code.

h. Visit

http://www.esfi.org

Foundation International (ESFI) is the premier non-profit organization dedicated

exclusively to promoting electrical safety at home and in the workplace. Since 1994,

ESFI has led the way in promoting electrical safety across North America.

3) Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs,

alcohol or medication. A moment of inattention while operating power tools may result

in serious personal injury.

b. Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool. have

the switch on invites accidents.

c. Remove any adjusting key or wrench before turning the power tool on. A wrench or a

key left attached to a rotating part of the power tool may result in personal injury.

d. Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

e. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

f. If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce

dust-related hazards.

WARNING Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, strong gloves, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Always use certified e.g. ANSI safety equipment.

Wear protective safety glasses with side shields. The operation of any power

tool can result in flying debris. Everyday prescription eyeglasses are NOT protective

safety glasses.

Wear hearing protection. Under some conditions and duration of use, the

operation of this power tool may become noisy and affect hearing.

Wear a dust mask. Some dust created by power sanding, sawing, grinding,

for more information on electrical safety. The Electrical Safety

Owner's Manual

Page 2 of 6