Great Outdoors Pinnacle GP600 Montage - Pagina 5
Blader online of download pdf Montage voor {categorie_naam} Great Outdoors Pinnacle GP600. Great Outdoors Pinnacle GP600 8 pagina's. Pinnacle series grills
Pagina afdrukkenStep 7: Install internal components.
Required: (4) (5 for GP600) sear plates; (3) (4 for GP600) cooking grates; (1) warming rack
Place the sear plates into the base unit,
ensuring the edge with the finger hole
faces the grill front.
Position the cooking grates into the base
with the finger holes facing the front.
NOTE: The cooking grates may be turned
over to provide a flat surface for cooking
delicate foods.
Set the warming rack into the two supports
in the ends of the rear lid (Fig. 7).
Step 8: Install the LP cylinder (LP Models only).
Required: LP gas cylinder
NOTE: Refer to the User's Manual for the cylinder filling
requirements, regulator attachment, and leak testing
procedures, before lighting the grill.
Insert the propane (LP) cylinder into the hole provided
in the bottom panel. Connect the cylinder to the
regulator.
Sear
plates (4/ 5)
Cooking
grates (4/ 5)
Page 5
GP450/ GP600 ASSEMBLY
Warming
rack (1)
Finger
hole
Fig. 7
Fig. 8