Gaggenau VG 415 210 CN Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gaggenau VG 415 210 CN. Gaggenau VG 415 210 CN 17 pagina's. Gas wok

Pagina afdrukken

Operation

The markings on the control knob show the setting

from level 1 to 12 and simmering Â.

Notes

‒

Only light a burner if the pan support and burner

parts are properly assembled.

‒

Make sure the burners and electrodes are clean

and dry.

‒

Only use the recommended accessories. Do not

cover the stainless steel cooktop base (e.g. with

aluminium foil).

‒

Do not cover the air inlet underneath the pan

support.

Caution! Heat damage to the extractor hood: Always

switch on the extractor hood while the gas cooktop is

in use. When using several cooking positions select a

higher fan level on the extractor hood. Make sure there

is a sufficient ventilation of the room.

Switching on

Your cooktop features automatic fast ignition.

Place a suitable pot or pan on the burner.

Press down the control knob and turn it

anticlockwise to the required cooking level. The

burner lights automatically.

The cooking level can be set by slowly turning the

control knob.

Notes

‒

When using large pots or pans you should ignite

the burner on a low cooking level.

‒

When being switched on, a short sound may be

heard when the electronics of the gas hob opens

the gas supply valve. This is a normal condition.

‒

Every time the gas hob is switched on, the

electronics runs an auto test. The electrode fires

and the burner ignites after a few seconds.

‒

The cooktop cannot be used during a power

failure.

Simmering

The burner switches the flame on and off when

simmering. You can use simmering for example to melt

chocolate or prepare delicate sauces.

Turn the control knob to Â. The time slot for switching

on / switching off is approx. 30 seconds.

Electronic flame detection and

automatic re-ignition

For your safety the cooktop features electronic flame

monitoring. Should the flame go out during operation

(e.g. because of a draught), the appliance will

automatically re-ignite the burner.

Should the re-ignition be unsuccessful (e.g. burner is

soiled by spilled over food or liquid), the gas supply is

switched off. The luminous disc behind the control

knob flashes.

Turn the control knob to the OFF position. After the

appliance has cooled down sufficiently, check this

burner to see if all the burner parts have been

assembled correctly. Check if the burner or the

electrode has been soiled (see trouble shooting

guide).

Switching off

Fully turn the control knob to the OFF position. The

electronics of the appliance switches the gas supply

off.

Risk of burns!

When the appliance cover is closed, heat will

accumulate. Only close the appliance cover when the

appliance has cooled down. Never switch the

appliance on with the appliance cover closed. Do not

rest food on the appliance cover or use it to keep food

warm.

Residual heat indicator

The luminous disc behind the control knob flashes

after switching off, to indicate that the appliance has

still not cooled down to such an extent that it can be

touched safely.