GREAT PLAINS NTA607HD Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} GREAT PLAINS NTA607HD. GREAT PLAINS NTA607HD 12 pagina's. Lift assist adjustments

Pagina afdrukken
4
Great Plains Manufacturing, Inc.
Before Starting
Dense Heavy Overhead Object Hazard:
Use adequate lifting means. Use both mounts
Keep all workers clear of area while a weight is overhead.
Keep hands away from underside of weights, and out of stack-
to-stack contact regions. Weight stacks have a mass of 374kg
(825 pounds). A hoist failure could result in substantial equip-
ment damage, serious injury or death. Hands in the path of
weight movement can be crushed.
Refer to Figure 2 (6in 80-row model with blockage module)
There are three sets of weights bolted to the center
frame weldment. Remove the mid weight stack
This may be the only weight that needs to be removed if
it satisfactorily produces the result you desire. The only
way to judge the result is by running the unit in the field
once the weight is removed.
Null4:
Before Proceeding with Instructions

Refer to Figure 3

Check caster stabilizers
unlikely, but casters may want to swing out of position.
Stabilizer bolts should be adjusted tightly enough to
ensure this does not occur. See "Caster Brakes" in the
lubrication section of the Operator Manual (166-283M).
Do not set cart weight transfer higher than necessary.
Values close to 1000 psi can lift the rear of an empty cart
off the ground see "Cart Weight Transfer Adjustment
(Inner Valve)" on page 6.
166-365M
for lifting.
2
1
are properly adjusted. It is
3
first.
NTA607HD Lift Assist Adjustments
1
2
Figure 2
Weight Stacks
3
3
Figure 3
Caster Stabilizers
2
12/02/2010