Dynabrade 61200 Veiligheids-, bedienings- en onderhoudsinstructies - Pagina 3

Blader online of download pdf Veiligheids-, bedienings- en onderhoudsinstructies voor {categorie_naam} Dynabrade 61200. Dynabrade 61200 12 pagina's. Electric drum vacuum

Pagina afdrukken
Read and understand tool manual before work starts
to reduce risk of injury to operator, visitors, and tool.
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
Read and understand this tool manual before operating your tool. Follow all safety rules for the protection of operating personnel as well as
adjacent areas. For safety information, refer to Code of Federal Regulation –CFR 29 Part 1910, NFPA 79, NFPA 70, NFPA 652, IEC, ISO 12100, ISO
14121-2 TR, EN 50281, EN 50495, EN 14986, EN 15188, EN 16009 –Safety Requirements and applicable State and Local Regulations.
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
•
Lead from lead-based paints
•
Crystalline silica from bricks and cement and other masonry products
•
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
•
Do not use for explosive metallic dust (Aluminum, Magnesium, etc.)
•
Never use to exhaust chemical vapors.
•
Not to be used for the collection of hot embers / dust particles.
Tool Intent:
The intended use of portable complete vacuum head assembly kit to be used with 55 (208 Liters) Gallon drums for the safe collecting of dust/chips
captured through the process of sanding with hand tools/General purpose of non-metallic materials such as wood, fiberglass, composites, and solid
surface etc.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
Dynabrade products, they must be used as intended. Modifying equipment may create hazardous situations.
This unit must be grounded. If the unit should malfunction or break down, grounding
provides a path of least resistance for electric current to reducethe risk of electric shock.
WARNING
•
Visually inspect plugs and cords for frays, visible damage, and signs of deterioration or deformation.
•
Plug equipment into proper outlet based on model/voltage. Always use a grounded power supply.
•
Ensure that a clean dry drum is being used in conjunction with DrumVac kit.
•
When unloading equipment from box, all other operators are to remain clear of work-cell.
•
Use proper/safe methods when transporting equipment. Improper pushing and pulling methods will increase operator strain.
•
When transporting equipment from work-cell to work-cell, do not pull in operator direction.
•
Slowly remove vacuum head from packaging and stage on flat surface before assembly.
•
Slowly remove interface ring from packaging and install on top of 55 (208 Liters) Gallon Drum.
•
With power source disconnected from system, apply the vacuum head to the top of the interface ring and lock in place.
•
Be sure to properly lock down vacuum head to interface ring with provided latches on each side.
•
Be sure to keep fingers and hands clear from pinch points upon re-assembly.
•
Ensure to install DrumVac kit together with proper 55 (208 Liters) Gallon 33" High x 22 1/2" Dia Cylindrical ASTM grade 1.1mm wall thickness, Carbon Steel Open
Head Drum. UN-Solid Rating: 1A2/X400/S
GENERAL POWER EQUIPMENT SAFETY WARNINGS

GROUNDING INSTRUCTIONS

Grounding by means of a ground wire between both ends of the air supply tubing passing through vacuum hose is recommended.
ASSEMBLY AND INSTALL
WARNING
The term "equipment" in the warnings refers to your (corded) vacuum system. Do not modify
Where it is critical to avoid shocks or sparks caused by static electricity,
an electrically conductive and grounded air supply hose must be used.
WARNING
CAUTION
3
Eye protection must be worn at all times,
eye protection to conform to ANSI Z87.1.
Practice safety requirements. Work alert, have
proper attire, and do not operate tools under the
influence of alcohol or drugs.
Electric shock hazard. Avoid bodily contact with
grounded objects, bodies of water. Do not damage
cord set.