AffloVest RP8003 Gebruiksaanwijzing en handleiding - Pagina 15
Blader online of download pdf Gebruiksaanwijzing en handleiding voor {categorie_naam} AffloVest RP8003. AffloVest RP8003 17 pagina's.
Pagina afdrukken
E
LECTROMAGNETIC
The AffloVest is intended for use in the electromagnetic environment specified below. The customer or user of the
AffloVest should ensure that it is used in such an environment.
E
I
MITTED
NTERFERENCE
RF emissions as per CISPR 11
Harmonic component emissions as per IEC 61000-3-2
Voltage fluctuations/flicker emissions as per IEC
61000-3-2
The AffloVest is intended for use in the electromagnetic environment specified below. The customer or user of the AffloVest
should ensure that it is used in such an environment.
I
IEC 60601-T
NTERFERENCE
I
T
MMUNITY
ESTS
Electrostatic discharge
±6 kV Contact
(ESD) as per IEC
61000-4-2
±8 kV Air Discharge
Fast Electrical
±2 kV for Power
Transients/Bursts as
per IEC 61000-4-4
±1 kV for Input/Output
Surge Voltages
±1 kV Normal-Mode
(Surge) as per IEC
61000-4-5
±2 kV Common-Mode
EVoltage Dips, Short-
<5% Ut (>95% dip in
Term Interruptions and
Ut) for 0.5 cycle
Fluctuations in Supply
40% Ut (60% dip in
Voltage as per IEC
Ut) for 5 cyclres
61000-4-11
0% Ut (30% dip in Ut)
<5% Ut (>95% dip Ut)
Power Frequency (50
Hz) Magnetic Field as
per IEC 61000-4-8
G
UIDELINES FOR
M
EASUREMENT
C
EST
OMPLIANCE
L
EVEL
±6 kV Contact
Discharge
Discharge
±8 kV Air Discharge
±2 kV for Power
Supply Lines
Supply Lines
±1 kV for Input/Output
Lines
Lines
±1 kV Normal-Mode
Voltage
Voltage
±2 kV Common-Mode
Voltage
Voltage
<5% Ut (>95% dip in
Ut) for 0.5 cycle
40% Ut (60% dip in
Ut) for 5 cyclres
0% Ut (30% dip in Ut)
for 25 cycles
for 25 cycles
<5% Ut (>95% dip Ut)
for 5 s
for 5 s
3 A/m
3 A/m
Note: Ut is the mains AC voltage prior to application of the test level.
C
A
LINICAL
PPLICATIONS
C
E
ONFORMITY
LECTROMAGNETIC
Class B
The AffloVest is suitable for use in all
establishments, including domestic, and those
Class A
directly connected to the public power supply
network that supplies buildings used for domestic
Compliant
purposes.
L
E
EVEL
LECTROMAGNETIC
Floors should be wood, concrete, or ceramic tile. If floors
are covered with a synthetic material, the relative humidity
Mains power quality should be that of a typical
commerical or hospital environment
Mains power quality should be that of a typical
commerical or hospital environment
Mains power quality should be that of a typical
commercial or hospital environment. If the user of the
AffloVest requires continued operation during interruptions
in the power supply, it is recommended that the AffloVest
be powered from an uninterruptible power supply or
Power frequency magnetic fields should be at levels
characteristic of a location in a commercial or hospital
E
G
NVIRONMENT
UIDELINES
E
G
NVIRONMENT
UIDELINES
should be at least 30%
battery
environment