7inova 7R200 Snelle installatiehandleiding

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} 7inova 7R200. 7inova 7R200 1 pagina's. 3g wireless travel reader 150m

Pagina afdrukken

Quick Installation Guide

3G Wireless Travel Reader 150M

Model: 7R200

Before you start to use this device, please check if there's anything

missing in the package, and contact your dealer of purchase to claim

for missing items:

Package Contents:

1x 7R200 3G Wireless Travel Reader

1x 1m Ethernet cable with RJ45 connector

1x Quick Installation Guide

3 Application Modes Introduction

(3G Mode is Default mode. For wireless encryption or change to Wireless Router / AP

/ WISP + Bridge Mode, please login and setup on web browser with followed steps)

3G Mode

Plug 3G modem into the router's USB port,

configure accordingly, computer / WI-FI phone /

Tablet can connect the router wired / wireless

and share 3G internet. Under 3G Mode, the

Ethernet port is used as LAN port.

Wire Mode

Under Router Mode, the Ethernet port is used

as WAN port. Connect 7R200 with ADSL

Modem port using RJ45 cable. Computer/WI-FI

phone/Tablet can connect the router wirelessly

and share internet.

Wireless Client Mode

Under WISP+Bridge Mode, the router can connect

Wireless hotspot or wireless router, make wired

device wireless ready, and bridge wireless signal,

extend wireless signal range, Create a new SSID.

The Ethernet port is used as LAN port. To avoid

same IP address as front-end router, users need to

set different IP address.

LED indicators' Status Description:

Lamp

Ethernet

For 3G USB Modem

Reset: If need to reset the router, press and hold WPS/RESET button for 8-10 seconds, all indicators

will be on, release until all other LED are off except Power LED.

Cautions:

1. Disconnect the device in thunderstorms in case of lightning damage.

2. Keep far from heat source and ensure ventilation.

3. Keep waterproof in the storage, transportation and operating environment.

Indicator

Name

Power Status Indicator

Ethernet Status Indicator

Wireless Status Indicator

Device Connection

To use 3G Mode, plug 3G modem into

USB port of 7R200.

To use Wireless Client Mode, connect 7R200

and device (Such as desktop computers) via

RJ45 cable as following show.

Wireless Devices

3G Lan Card

Wireless Devices

Modem

Wireless Devices

USB Dongle

Reset

Status

Description

Red On

Get Powered

Green On

Ethernet Connected

Green fast blink

Data Transmission via Ethernet

Green slow blink

Wireless Function Launched

Green fast blink

Data Transmission via wireless

To use Wire Mode, plug one side of RJ45

cable into 7R200's Ethernet port, plug the

other side into Modem's LAN port.

ADSL Modem

Ethernet

Windows 7

Computer Configuration

(Before configuring, first ensure your PC has installed wireless LAN card)

Click"Start→Control Panel→Network and Internet→Network and Sharing Center→Change

adapter settings→Wi-Fi(right click)→Properties"

Double click"Internet Protocol Version 4(TCP/IPv4)"

Select "Obtain an IP address automatically" and "Obtain DSN server address automatically".

Click "OK". Back to the last interface and click "OK"

Connect To Wireless Network

(Note: You have to get device connected wirelessly firstly then can login Web browser)

After Wireless LAN card

installed successfully,

click

icon on the lower

right corner of desktop.

Router Configurations

Open a web browser, type 192.168.100.1, and press Enter,

type the password (default is admin). Click "login".

According to the choice of mode for wireless parameters Settings.

3G Mode

WAN Mode Select

●

○

3G Mode

Wire Mode

Connection Settings

Operator

Auto

WAN Select

Auto

Dial Number

APN

User Name

Password

pin code

Auth Type

Auto

Keep Alive

Operation Mode

Redial Period

Idle Time

600

Wire Mode

WAN Mode Select

○

●

3G Mode

Wire Mode

WAN Connection Mode:

Static IP

Wireless Client Mode

WAN Mode Select

○

3G Mode

Wire Mode

Wireless client mode

SSID:

MAC:

Channel:

Disable

Safe mode:

File sharing

Download and install FTP client applications from respective app stores to phones or tablets. Thus it

could make use of file sharing function. Popular FTP client software includes: AndFTP, elfin FTP, ES

File Brower, etc.

When sharing files through FTP client software in phones or tablets, simple settings are necessary

for the first time. In the FTP client software, server settings are: 192.168.100.1. Account and

password are both:"admin". Enter into media/sda directory to enjoy sharing the files from USB flash

disk or mobile HDD.

Multimedia sharing

Built-in with multimedia server, the product supports DLNA sharing technology, identify automatically

and play media files like videos, music, pictures stored in the wirelessly connected USB flash disk or

mobile HDD. Supported file formats include：

● Support tens of video formats such as MKV、avi、mp4、mov、3gp、mpeg、m4v;

● Support audio formats like LPCM、AAC、AC-3、ATRAC 3plus、MP3、WMA9；

● Support picture formats like JPEG、PNG、GIF、TIFF.

Terminals with player supporting DLNA installed can share multimedia playing through the device.

For instance: smart devices could stream the media files stored in USB flash disk connected to the

product to TV screen with HDMI port with the help of fleetlink stick in the market.

Search out the device(by its identifier) as multimedia server in the client player and make it without

any settings. Please refer to detailed instructions on specific software operation.

Popular APP software on the following platform：

● Apple platform（iPhone 、iPad、iTouch）:

Download the players supporting DLNA from App Store such as：AirPlayer, GoodPlayer, AirMusic,

flex:player, yxplayer.

● Android platform (phones and tablets based on android system):

Download the players supporting DLNA from App Store. For example, SoftMedia,VPlayer ，Tencent

video,kascend music,PowerDVD.

Reconnect to Router

Select the wireless

network name

configured in step 2,

click "Connect" button.

Telephone

line

What can I do if I forgot my password?

1) Restore the 7R200's configuration to its factory default settings. (With 7R200 powered on,

press and hold the Reset button for about 10 seconds before releasing it).

2) To log in the Web Management page, use the default user name and password: admin,

admin. To connect to the Wireless Network, use the default password on the label.

3) Try to configure 7R200 once again by following the instructions in the previous steps of the QIG.

Please click on the steps to set up Windows 7 system

Select the SSID of your target

network from the displayed list

and click"Connect"

Not connected

Connections are available

Wi-Fi

7inova-535060

Information sent over this network might

be visible to others.

Connect automatically

Connect

7inova-535050

7inova-521635

Open Network and Sharing Center

It's the initial default networking mode. Insert a 3G wireless

○

modem (dongle) into the USB port of the device, if the blue LED

Wireless Client Mode

is always on, it means a successful 3G network connection. Then

other devices connected with this WiFi can share the 3G network

APN Info

connection.

Note: if the blue light blinks slowly, it implies the plugged 3G

modem is not supported, firmware of this device may need to be

updated.

The devices support about 150 different 3G adapters; contact

your supplier if your model is not supported.

seconds

● PPPoE

PPPoE mode，that is ADSL dial-up networking mode：Input the

ADSL account and password ISP provides, click "OK".

● STATIC

○

Wireless Client Mode

Static IP networking mode：it is appropriate when front-end

router or ISP device uses assigned IP address.

● DHCP

Dynamic IP address distribution mode：specific IP addresses

are allocated automatically and dynamically between devices.

Select "Wireless client mode" in the above figure. And then click

●

Wireless Client Mode

"start scanning", and it should display nearby APs. Select

preferred AP (by SSID), type its security mode and password if

needed. Click"Apply".

If you encrypted wireless

Not connected

network in step 2, the

Connections are available

following message will

Wi-Fi

be displayed on web

7inova-535060

browser, fill in password,

Connect automatically

Connect

click "OK"

7inova-535050

7inova-521635

Open Network and Sharing Center

Appendix: Troubleshooting

When shows:"Connected",

means your computer has

connected to wireless

network successfully.

Currently connected to:

7inova_535060

Wi-Fi

7inova-535060

Connected

Disconnect

7inova-535050

7inova-521635

Open Network and Sharing Center

Connect to 192.168.100.1

3GRouter

User name:

Password:

Remember my password

Cancel

Connect to a Network

Type the network security key

Security Key:

Hide characters

O K

Cancel