DYNACO Stereo 400 Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} DYNACO Stereo 400. DYNACO Stereo 400 12 pagina's. Replacement rca jack

Section 2: Kit Building Hints

Yes, I know you want to ignore this section and jump right into building the kit.

However, please take a minute and read the advice. I've condensed it into bullets so that

even you guys who are in a hurry can benefit.

 Stop any time you're feeling confused, tired, or anxious. Taking breaks at those

strategic times will keep the build enjoyable and greatly enhance your chances of

first-time success.

 A soup bowl is your friend. Before you build, carefully empty the parts for just

that board into a broad, flat, light colored soup bowl. That makes it easy to find

the parts, and keeps them from getting lost.

 Is something in this manual confusing? Does something look wrong? Send your

questions by email to

help yourself and everyone who builds the kit.

We recommend you read through this section first before you start to build. After you've

read through it, go back and begin building the RCA jack assembly.

Remove and reserve the nuts that holds the ground lug to the RCA jack. Bend the RCA

jack ground lugs as shown here using needle-nose pliers:

Install the gold-plated RCA jacks in the ST400 BD1 printed circuit board as shown in

Figure 3 and Figure 4.

Page 5 of 12