HiB Atrium 80 Installatie-instructies - Pagina 4
Blader online of download pdf Installatie-instructies voor {categorie_naam} HiB Atrium 80. HiB Atrium 80 4 pagina's. Cabinet
Pagina afdrukken
This product is IP44 rated and is suitable for installation in zones:
All installations must comply with guidelines which are based on a zonal concept. The diagram above
illustrates this concept and must be followed to ensure the safe installation of electrical appliances in the
bathroom. These regulations apply to domestic installations only. Installations must be made in accordance
with the current IEE wiring regulations and relevant building regulations.
Electrical Safety Information
HiB recommends that all electrical bathroom
products must be installed in accordance with
current building and wiring regulations. If in
doubt please contact an electrician. Ensure mains
power supply is switched off before starting
installation.
2-Pin charging socket(s) - Charger socket(s) are
suitable for charging and powering electric razors,
trimmers and toothbrushes. Some cabinets may
contain multiple charging sockets.
NB. On first use of the charger socket, inserting the
plug may prove to be stiff. Reasonable force may
be required to fully insert the plug. Make sure that
the cabinet is held firmly so that it is not pushed off
the wall. After a few uses, stiffness will ease and
the socket will function as normal.
USB socket(s) - If an appliance is connected and
the current draw exceeds 1.5A, the USB driver will
automatically go into protective shutdown mode
and the LED light on the USB socket will flash.
T:
+44 (0)20 8441 0352
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and
make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
F:
+44 (0)20 8441 0219
Disconnecting the appliance will reset the USB
driver.
Any appliance that requires more than the 1.5A
current should not be used in the USB socket
Care Instructions
Do not use abrasives or solvents when cleaning
this product.
Wipe off all water spillages as soon as possible
using a soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail
please contact HiB customer services, contact
details shown below.
WEEE compliance
Must not be mixed with
general household waste
E:
hib.co.uk
(Fig.1)
&
2
Outside Zone