Aircraft in Miniature Limited Historic Wings Fokker Spin 1912 Montagehandleiding - Pagina 6

Blader online of download pdf Montagehandleiding voor {categorie_naam} Aircraft in Miniature Limited Historic Wings Fokker Spin 1912. Aircraft in Miniature Limited Historic Wings Fokker Spin 1912 10 pagina's. 1:72 metal kit

Aircraft in Miniature Limited Historic Wings Fokker Spin 1912 Montagehandleiding
FUEL PIPE
(nickel-silver part)
(nickel-silver part)
ENGINE
PROPELLER

5 FINAL ASSEMBLY

A Attach the radiator to the fuselage structure behind the fuel tank pylon.
B Attach the fuel tank to the fuel tank pylon.
C Attach the engine to the front of the fuselage structure.
D Attach the nickel-silver detail parts:
(1) Attach the pipe to the right side of the engine block.
(2) Attach the radiator hose between the engine block and the radiator.
(3) Attach the fuel pipe to the under side of the fuel tank and to the engine.
E Attach the propeller to the engine.
6 AIRFRAME COVERING AND PAINTING
A If the airframe is to be painted, do it at this stage in the assembly. Paint the
structure to resemble a light to medium brown wood. If the model is to be
covered with Litespan film, do not paint those areas where adhesive will be
applied.
B If the model is to be covered with Litespan film (the film), cover the fuselage
and flying surfaces now. For each area:
(1) Cut a piece of the film which is larger than the panel.
(2) Apply a continuous layer of cyanoacrylate adhesive (superglue) to the
structures where the film will be attached.
(3) Attach the edge of the piece of film to one long edge of the bay and press it
down so that it is smooth, and without creases.
(4) When the superglue has attached the film securely, apply more
superglue to the other three sides of that bay.
PIPE
ENGINE
(Ref)
(see Figure 5)
RADIATOR
(nickel-silver part)
FUEL TANK
RADIATOR
Figure 5
FUEL TANK
(Ref)
HOSE