GREAT PLANES Fling 2m ARF Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} GREAT PLANES Fling 2m ARF. GREAT PLANES Fling 2m ARF 16 pagina's.

❏

4. Secure the tail assembly to the fuselage using two #2

hex nuts and #2 flat washers as shown. Be sure not to

overtighten the nuts as the stab could become damaged.

Apply a drop of Threadlocker to each hex nut to prevent it

from backing off.

❏

5. Trim the fin posts to 1/8" [3.2 mm] past the #2 hex nuts.

❏

6. Locate the two plastic halves for the tail skid.

❏

7. Glue the two tail skid pieces together as shown using CA.

❏

8. Insert the tail skid post into the slot cut in the tail of the

fuselage and glue in place using CA as shown.

Install the Servos & Pushrods

❏

1. Install the servos in the fuselage servo tray as shown.

If you will be using standard size servos, cut the inner

framework away from the servo tray to accommodate these

larger servos. Note: The following photos will show the

installation of micro servos.

❏

2. Temporarily connect your servos to your radio system.

Turn on the radio with the trims centered and center the

servos. For a 2-channel sailplane such as the Fling 2M ARF,

the rudder is plugged into the aileron channel and the

elevator is in the elevator channel.