HiB 79520500 Montagehandleiding - Pagina 6

Blader online of download pdf Montagehandleiding voor {categorie_naam} HiB 79520500. HiB 79520500 8 pagina's.
Ook voor HiB 79520500: Snelstarthandleiding (2 pagina's)

Pagina afdrukken

Installation

SOLAS mirrors must be installed with a minimum distance of 150mm

between the infra-red sensor switch and any adjacent wall or object to

It is recommended that this product is installed by two people.

1. Position the mirror in a suitable location (according to the zonal diagram -

Fig. 1), ensuring that the domestic electrical mains supply is within reach of

the electrical entry point of the product.

2. Carefully mark the position of the mirror using a soft pencil ensuring it is

level. Remove the mirror and mark the mounting points, see Fig. 2. Please

ensure that all marked mounting points accurately match up with the

fixing points on the mirror.

3. Using a suitable drill bit, drill holes in the marked positions to a suitable

depth. If drilling through tile, use a ceramic drillbit.

4. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface,

wall plugs should be inserted below the tile surface to avoid cracking. NB.

For plasterboard walls, specialist fixings should be purchased, available

from any DIY or hardware store.

5. Screw supplied fixings into wall plugs.

6. Ensure the domestic electrical mains supply to which the mirror is

being connected is turned off. Connect the domestic mains supply to the

terminal box according to the wiring diagram, see page 3.

7. Hang the mirror in position.

8. Switch the domestic electrical mains supply for the mirror back on.

ensure correct operation of the sensor.