GREAT PLANES Spirit 100 Gebruiksaanwijzing - Pagina 4
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} GREAT PLANES Spirit 100. GREAT PLANES Spirit 100 20 pagina's.
Pagina afdrukken
Optional Supplies and Tools
Here is a list of optional tools mentioned in the manual that
will help you build the Spirit 100 ARF.
❏
CA Debonder (GPMR6039)
❏
36" Metal Ruler (HCAR0475)
❏
Hobbico
®
Duster
™
Can of Compressed Air (HCAR5500)
❏
Servo Horn Drill (HCAR0698)
❏
AccuThrow
™
Deflection Gauge (GPMR2405)
❏
CG Machine
™
(GPMR2400)
❏
Cover Sock (COVR2702)
IMPORTANT BUILDING NOTES
• Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use. When
a specific type of adhesive works best for that step, the
instructions will make a recommendation.
• Whenever just epoxy is specified you may use either 30-
minute (or 45-minute) epoxy or 6-minute epoxy. When 30-
minute epoxy is specified it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
• Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
• The Spirit 100 ARF is factory-covered with Top Flite
MonoKote film. Should repairs ever be required, MonoKote
can be patched with additional MonoKote purchased
separately. MonoKote is packaged in six-foot rolls, but
Inch Scale
0"
1"
0
10
20
30
Metric Scale
To convert inches to millimeters, multiply inches by 25.4
2"
3"
40
50
60
70
some hobby shops also sell it by the foot. If only a small
piece of MonoKote is needed for a minor patch, perhaps a
fellow modeler would give you some. MonoKote is applied
with a model airplane covering iron, but in an emergency a
regular iron could be used. A roll of MonoKote includes full
instructions for application. Following are the colors used
on this model and order numbers for six foot rolls.
True Red
Cub Yellow
Black
Orange
White
COMMON ABBREVIATIONS
4"
80
90
100 110 120 130 140 150 160 170 180
4
TOPQ0227
TOPQ0220
TOPQ0208
TOPQ0202
TOPQ0204
Fuse = Fuselage
Stab = Horizontal Stabilizer
Fin = Vertical Fin
LE = Leading Edge
TE = Trailing Edge
LG = Landing Gear
Ply = Plywood
" = Inches
mm = Millimeters
SHCS = Socket Head Cap Screw
5"
6"
7"