HiB ECLIPSE 21100 Montagehandleiding - Pagina 2
Blader online of download pdf Montagehandleiding voor {categorie_naam} HiB ECLIPSE 21100. HiB ECLIPSE 21100 8 pagina's.
Pagina afdrukkenElectrical Safety Information
HiB recommends that all electrical bathroom products must be installed
in accordance with current building and wiring regulations.
If in doubt please contact an electrician.
Before drilling ensure that there are no hidden cables or pipes in the wall.
Warnings for Safe Use
•
This product is intended for Domestic Use only.
•
Please read the instructions and warnings carefully before installing the
product and ensure this document is kept with the product for future
reference to ensure product longevity and in the interest of safety.
•
If you give the product to another person, please give them this manual as
well.
•
If any modification is made it will invalidate the warranty and may render the
product unsafe.
•
This product is IP44 rated and suitable for installation in Zones 2 and Outside
Zones according to the IEEE regulations.
•
It is not suitable for use in saunas, steam rooms and shower cubicles.
•
Appropriate circuit protection should be available for the product.
•
When drilling use appropriate eye protection.
•
The use of a Residual Current Device (RCD) is advised for any power tools used
during the installation of this product.
•
Take suitable precautions when handling glass.
•
Beware of hidden cables or pipes. Take care if drilling on tiled surfaces in case
the drill slips.
•
Always switch off the electrical supply to the product at the mains during
installation and maintenance.
•
It is recommended that this product is installed by a person who is able to
meet the level of competence required in order to comply with relevant
regulations. If in doubt consult a qualified tradesperson.
•
Do not enter IP44 box unless competent and item is isolated from mains.
•
Do not use if glass is broken or unsafe.
•
Do not use if any electrical wires appear damaged or degraded.
•
Do not overload shelves or unit.
•
This product is designed for installation into a brick or masonry block wall,
if mounting onto other substrate ensure appropriate fixing and batons (if
required) are used and the load bearing of the wall is sufficient.
•
It is recommended that this product is installed by two people.
•
Dispose of packaging in accordance to local authority regulations.
•
At end of life dispose of item according to local authority regulations.
2