GREAT PLANES YAK 55 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} GREAT PLANES YAK 55. GREAT PLANES YAK 55 16 pagina's. 3d ep with flightflex

❏

6. Test fit the ailerons to the wings. If necessary, enlarge

the precut hinge slots with a hobby knife.

❏

7. Glue the outermost hinge into the wing, making sure

to keep the hinge line parallel with the TE of the wing.

❏

8. Using the flex of the aileron to allow you to glue one

hinge in at a time, work your way inward until all four hinges

are glued in place.

❏

9. Use a hobby knife to clean any excess glue from

the hinges.

❏

10. Slide the 3mm [1/8"] carbon elevator joiner tube into

the plastic tubes on the stabilizer. Make sure it is centered.

❏

11. Run a small bead of hot-melt glue into the groove on

the leading edge of an elevator half. Run the glue-gun tip

back through the bead to re-melt and spread it, and press

the elevator half onto the joiner tube.

❏

12. Repeat the previous step with the other elevator half,

making sure to keep the elevator halves aligned with each other.