GREAT PLANES Yard Stik ARF Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} GREAT PLANES Yard Stik ARF. GREAT PLANES Yard Stik ARF 16 pagina's.

3. If you haven't already done so, plug the receiver crystal

into the receiver. Be certain the crystal matches the band

(high or low) for the receiver you are using.

4. Make certain the throttle control on the transmitter is all

the way down. Connect the servos and speed controller to the

receiver. Turn on the transmitter, and then connect the battery

to the receiver. Center the trims on the transmitter. If the servo

arms aren't already centered, take the arms off the servos

and center the arms. Remount the arms with the screws.

5. If necessary, use pliers to open or close the V-bends

in the pushrods to get the rudder and elevator centered.

3-CHANNEL RADIO SETUP

(STANDARD MODE 2)

4-CHANNEL

TRANSMITTER

4-CHANNEL

TRANSMITTER

4-CHANNEL

TRANSMITTER

6. Use the control sticks on the transmitter to operate the

elevator and rudder. Make certain they respond in the

correct direction. If they do not, use the servo reversing

switches in the transmitter to change the direction.

7. Reminder: The propeller should be removed from the

motor while performing setup operations in the shop. Follow

the instructions included with whatever speed controller you

have selected to turn on the motor. If necessary, reverse the

throttle servo reversing switch to get the motor to turn on

when the throttle is advanced.

Set the Control Throws

IMPORTANT: Do not overlook this important procedure.

The control throws have a great effect on how a model

flies and may determine whether or not your first flight is

a success.

1. Use the transmitter to move the elevator all the way up

and down and measure the distance the trailing edge moves

(throw). The distance should be 3/4" [19mm] up and 3/4"

[19mm] down. If necessary, move the elevator pushrod to

another hole in the control horn to change the throw. Moving

ELEVATOR MOVES UP

RUDDER MOVES RIGHT

MOTOR TURNS