Automated Logic U253 Technische instructies - Pagina 3

Blader online of download pdf Technische instructies voor {categorie_naam} Automated Logic U253. Automated Logic U253 11 pagina's.

Pagina afdrukken
14.5 cm

Job Start-Up

WebCTRL and SuperVision require different
module drivers and Eikon software. The
appropriate module drivers, Eikon for
WebCTRL or Eikon 3.0a or later, and a sample
U-Line GFB can be downloaded from
Automated Logic Corporation's web site
(http://www.automatedlogic.com). You can
also order a copy of Eikon for WebCTRL or
Eikon on CD through Order Administration.

Job Start-Up for WebCTRL

For a WebCTRL system, you need these items
to properly start up and support U-cards:
• UNI/16 with the DRV_UNI16 module
driver, or UNI/32 with the DRV_UNI32
module driver
Revised 8/14/02 • U253
0.2"
0.5 cm
5.2"
5.7"
13.2 cm
0.2"
0.5 cm
Figure 1. U253 Layout and Dimensions
5.1"
13 cm
2.6"
6.6 cm
Enclosed Energy
BACnet
Management Equipment
IN-1
R
Gnd
88FO
IN-2
E143900
Analog
Outputs
TYPE: 000553
Inputs
24V Max, 1A Max
Gnd
Single Class 2
IN-3
Source Only
Gnd
n/c
7
8
Run
6
9
U253
5
0
4
1
3
2
7
8
Error
CAUTION:
6
9
5
0
This product was designed to be
4
1
mounted inside the building envelope.
3
2
Warranty voided if mounted outside.
Tx
Unet +
Unet -
Rx
U-com
Gnd
Temp
Sw
LS5v
• Eikon for WebCTRL
• U-Line Zone GFBs

Job Start-Up for SuperVision

For a SuperVision system, you need these
items to properly start up and support U-
cards:
• UNI/16 with the U1M module driver,
UNI/30 with the U3M module driver,
UNI/32 with the UNM module driver, or
UNI/59 with the U5M module driver
• Eikon 3.0a or later
• U-Line Zone GFBs
If you have InterOp Tools version 3.0 you
must install Eikon 3.0a or the InterOp Tools
3
© 2002 Automated Logic Corporation
TM
MSTP
DO-2
DO-1
Power for D.O.s
BUSS
Flow Sensor
Flow 1
+ 10V
Gnd
Flow 2
Gnd
AO-3
Gnd
Analog
Outputs
AO-2
Gnd
AO-1
Class 2
24 Vac
50-60 Hz
7.0VA
0.29A
Use Copper
Conductors
Only
On Off
Power
Gnd
24 Vac