Automated Logic ZS Plus Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Automated Logic ZS Plus. Automated Logic ZS Plus 16 pagina's.

To make the zone warmer or cooler

From the Home screen, press the

screen typically shows one of the following:

Press the

determines how much you can adjust the setpoint.

Wait a few seconds until the display returns to the home screen before you press any other

buttons.

Timed override to an occupied state

Press the

length of time specified in the control program's Increment field.

Press the

override the schedule is specified in the control program's Maximum Duration field.

Wait a few seconds until the display returns to the home screen before you press any other

buttons.

During the override, the bottom of the display shows the time (minutes) remaining in the override and

an hourglass to indicate the override state.

NOTES

•

If programmed, you can override the schedule for an indefinite amount of time. To do this, press

the

button one time, then press the

remains in effect until the schedule transitions to occupied or until you cancel it.

•

To cancel an override and return control to the schedule, press the

ZS Sensors

Rev. 4/27/2015

button to adjust the zone temperature setpoint. The control program

button one time to override the schedule and put the zone in an occupied state for a

button to incrementally increase the time. The maximum length of time that you can

ALC Proprietary and Confidential

button to show the Setpoint Adjustment screen. This

NOTE The control program may not show

the cooling and heating setpoint on this

screen.

button until the display shows 999. The override

button twice.